• Michael Nienhaus, Ivan Zderic, Dieter Wahl, Boyko Gueorguiev, and Pol Maria Rommens.
• Department of Orthopaedics and Traumatology, University Medical Center Mainz, Johannes Gutenberg-University, Mainz, Germany.
• J Bone Joint Surg Am. 2018 Jun 20; 100 (12): e83.

BackgroundDisplaced transverse patellar fractures require open reduction and internal fixation. State-of-the-art stabilization techniques are tension band wiring (TBW) using Kirschner wires or cannulated screws. These techniques are associated with high rates of secondary fracture displacement, implant migration, implant prominence, wound-healing disturbances, and the need for implant removal. Recently, a locked intraosseous patellar nail prototype was developed. The aim of the present study was to investigate the biomechanical performance of this nail compared with TBW using cannulated screws.MethodsSeven paired fresh-frozen human cadaveric knees were stripped of all soft tissues except the extensor apparatus. A transverse osteotomy was created to simulate an OTA/AO type 34-C1 transverse patellar fracture. The specimen pairs were randomly assigned to be fixed with TBW using cannulated screws or with the new intraosseous nail. Each specimen was cyclically tested for 5,000 cycles by pulling on the quadriceps tendon and simulating active knee extension and passive knee flexion within the range from 90° of flexion to full knee extension. Anterior and articular margin displacement of the fracture as well as interfragmentary rotation around the mediolateral axis were investigated with optical motion tracking after 100, 500, 1,000, 2,500, and 5,000 test cycles.ResultsWithin the respective 5 testing-cycle time points evaluated, the articular margin displaced on average 68%, 60%, 72%, 76%, and 81% less after intraosseous nailing compared with TBW. Whereas the difference remained nonsignificant after 100 and 500 cycles (p ≥ 0.116), a trend toward significance was observed after 1,000 cycles (p = 0.063), which became significant after 2,500 and 5,000 cycles (p ≤ 0.043).ConclusionsFrom a biomechanical point of view, the locked intraosseous patellar nail may be an alternative to TBW using cannulated screws because of the higher interfragmentary stability provided at the articular fracture site.Clinical RelevanceA locked patellar nail for transverse patellar fractures achieved a stable osteosynthetic construct that may reduce hardware-associated complications because of its intraosseous positioning.

22 keywords...

hide…