• Anesthesia and analgesia · Nov 2011

    Technical communication: An initial evaluation of a novel anesthetic scavenging interface.

    • John A Barwise, Leland J Lancaster, Damon Michaels, Jason E Pope, and James M Berry.
    • Department of Anesthesiology, Vanderbilt University Medical Center, 1301 Medical Center Dr., 4648 TVC, Nashville, TN 37232, USA.
    • Anesth. Analg.. 2011 Nov 1;113(5):1064-7.

    AbstractWaste anesthetic gas scavenging technology has not changed appreciably in the past 30 years. Open reservoir systems entrain high volumes of room air and dilute waste gases before emission into the atmosphere. This process requires a large vacuum pump, which is both costly to install and, although efficient, operates continuously and at near-full capacity. In an era of increasing energy costs and environmental awareness, carbon footprint reduction is a priority and a more efficient system of safely scavenging waste anesthetic gases is desirable. We tested a low-flow scavenger interface to evaluate the potential for cost and energy savings. The use of this interface in a suite of 4 operating rooms reduced scavenging flow from a constant 37 L/min to a value equal to the fresh gas flow (usually 2 L/min) for each anesthesia machine. Using the ventilator increased this flow by approximately 6 L/min because of the exhaust of ventilator drive gas into the scavenging circuit. Daytime workload of the central vacuum pump decreased from 92% to 12% (expressed as duty cycle). The new system produces energy savings and may increase vacuum pump lifespan.

      Pubmed     Free full text   Copy Citation     Plaintext  

      Add institutional full text...

    Notes

     
    Knowledge, pearl, summary or comment to share?
    300 characters remaining
    help        
    You can also include formatting, links, images and footnotes in your notes
    • Simple formatting can be added to notes, such as *italics*, _underline_ or **bold**.
    • Superscript can be denoted by <sup>text</sup> and subscript <sub>text</sub>.
    • Numbered or bulleted lists can be created using either numbered lines 1. 2. 3., hyphens - or asterisks *.
    • Links can be included with: [my link to pubmed](http://pubmed.com)
    • Images can be included with: ![alt text](https://bestmedicaljournal.com/study_graph.jpg "Image Title Text")
    • For footnotes use [^1](This is a footnote.) inline.
    • Or use an inline reference [^1] to refer to a longer footnote elseweher in the document [^1]: This is a long footnote..

    hide…