• Magn Reson Imaging · May 2005

    Selective averaging for the diffusion tensor measurement.

    • Jiun-Jie Wang, Ralf Deichmann, IngTsung Hsiao, HoLing Liu, YauYau Wai, YungLiang Wan, Robert Turner, and Roger Ordidge.
    • Department of Medical Imaging and Radiological Sciences, ChangGung University, TaoYuan county 333, Taiwan. jwang@mail.cgu.edu.tw
    • Magn Reson Imaging. 2005 May 1; 23 (4): 585-90.

    AbstractThe multishot echo planar imaging sequence was often used in the high-resolution diffusion measurements. However, it is susceptible to motion artifacts because of the requirements of combining the raw data from different acquisitions into one complete k-space data set. Conventional solutions used cardiac gating but greatly extended the total acquisition time. Here we propose a selective averaging algorithm based on the information in the navigator echoes. The data were sampled continuously without cardiac gating. Contributions contaminated by motion were detected by a thresholding algorithm and were discarded during postprocessing. The data were then averaged in the modulus or complex format. Diffusion tensor imaging (DTI) data with isotropic spatial resolution were acquired in phantom as well as from two normal volunteers. The information in the navigator echoes proved to be a good indicator for the extent of motion contamination. Differences were noticed between modulus and complex averaging in DTI quantification, but both showed reduced artifact and improved signal-to-noise ratio.

      Pubmed     Full text   Copy Citation     Plaintext  

      Add institutional full text...

    Notes

     
    Knowledge, pearl, summary or comment to share?

    User can't be blank.

    Content can't be blank.

    Content is too short (minimum is 15 characters).

    300 characters remaining
    help        
    You can also include formatting, links, images and footnotes in your notes
    • Simple formatting can be added to notes, such as *italics*, _underline_ or **bold**.
    • Superscript can be denoted by <sup>text</sup> and subscript <sub>text</sub>.
    • Numbered or bulleted lists can be created using either numbered lines 1. 2. 3., hyphens - or asterisks *.
    • Links can be included with: [my link to pubmed](http://pubmed.com)
    • Images can be included with: ![alt text](https://bestmedicaljournal.com/study_graph.jpg "Image Title Text")
    • For footnotes use [^1](This is a footnote.) inline.
    • Or use an inline reference [^1] to refer to a longer footnote elseweher in the document [^1]: This is a long footnote..

    hide…

What will the 'Medical Journal of You' look like?

Start your free 21 day trial now.

We guarantee your privacy. Your email address will not be shared.