The Journal of arthroplasty
-
The wear of 8 femoral and 2 acetabular components of the Birmingham Hip Resurfacing (Midland Medical Technologies Ltd, Birmingham, UK) was measured using a coordinate measuring machine (CMM5; SIP, Geneva, Switzerland). After a median in situ time of 13 months, measurements of the Birmingham Hip Resurfacing femoral heads revealed a median volumetric wear of 2.9 mm(3). ⋯ The 2 acetabular components showed volumetric wear of 5.4 and 27.6 mm(3) after 14 and 15 months in vivo. The wear rates of the investigated femoral components were somewhat, but not significantly, higher than the previously investigated 28-mm Metasul heads (median, 0.8 mm(3); Zimmer GmbH, Winterthur, Switzerland).
-
Adverse events from 2033 total knee arthroplasty patients were documented by nonphysician abstractors. The annual rate of adverse events from 2002 to 2004 was 9.2%, 6.4%, and 5.8%, respectively. Congestive heart failure (odds ratio, 2.1; 95% confidence interval, 1.2-3.5; P < .01) and chronic obstructive pulmonary disease (odds ratio, 1.8; 95% confidence interval, 1.2-2.7; P < .01) were associated with a significantly increased risk of experiencing any adverse event during the index hospitalization. ⋯ The 30-day postprocedure mortality rate was 0.3%. Experiencing any adverse event was associated with an increased 30-day postprocedure mortality (P < .001). Compared with previous studies of Medicare claims, these data reveal a substantial decrease in the mortality rate, an increased readmission rate, and no substantial change in the rate of venous thromboembolism.
-
A consecutive series of 40 periprosthetic femoral fractures, treated with revision hip surgery using the Oxford trimodular femoral stem, were retrospectively studied, with an average follow-up of 7.9 years. Fractures were classified according to the Vancouver classification. There were 5 type B1 fractures, 28 type B2, and 7 type C. ⋯ Clinical results were good with a mean Oxford hip score of 30 (hip score maximum, 48). Complications included 1 nonunion, 1 infection, 1 dislocation, and 2 aseptic loosening. The Oxford trimodular femoral component is a safe and reliable prosthesis for the treatment of periprosthetic femoral fractures with satisfactory medium-term results.
-
Clinical and radiographic outcomes of 184 consecutive revision total knee arthroplasties (TKAs) placed with cemented components and press-fit fluted cementless stems were reviewed at average follow-up of 49 months. Revision was performed for septic failure in 53 of 184 knees, periprosthetic fracture in 10 of 184 knees, and aseptic failure in 121 of 184 knees. The press-fit cementless stems were placed to tightly contact the endosteum of the metadiaphyseal area of the femur and tibia. ⋯ Revision TKA with modular cementless stems provided excellent fixation with no revisions for aseptic loosening. Re-revision for sepsis was the dominant failure mechanism with an overall rate of 7%. Given the increasing prevalence of revision TKA, sepsis prevention strategies should receive increased attention.
-
Case Reports
Hemorrhagic iliopsoas bursitis complicating well-functioning ceramic-on-ceramic total hip arthroplasty.
Iliopsoas bursitis has been increasingly recognized as a complication of total hip arthroplasty and is usually associated with polyethylene wear. Here, the authors report a case of hemorrhagic iliopsoas bursitis complicating an otherwise well-functioning ceramic-on-ceramic arthroplasty performed by minimal invasive modified 2-incision technique. The bursitis in turn resulted in femoral nerve palsy and femoral vein compression. In this report, there was no evidence to support that the bursitis was due to an inflammatory response to ceramic wear particles or any other wear particles originating from the total hip arthroplasty.