• Frederick Osei-Yeboah, Minglun Zhang, Yushi Feng, and Changquan Calvin Sun.
• Pharmaceutical Materials Science and Engineering Laboratory, Department of Pharmaceutics, College of Pharmacy, University of Minnesota, Minneapolis, Minnesota, 55455.
• J Pharm Sci. 2014 Aug 1; 103 (8): 2434-40.

AbstractGranules prepared by the high shear wet granulation (HSWG) process commonly exhibit the problem of overgranulation, a phenomenon characterized by a severe loss of the ability to form adequately strong tablet. We hypothesize that the incorporation of brittle excipients promotes brittle fracture of granules during compaction, thereby improving tablet mechanical strength by increasing bonding area. On this basis, we have examined the effectiveness of incorporating a brittle excipient into a plastic matrix in addressing the overgranulation problem. A complete loss of tabletability is observed for plastic microcrystalline cellulose (MCC) when ≥ 55% of granulating water was used. The incorporation of a brittle excipient, either lactose or dibasic calcium phosphate (Dical) into the MCC matrix leads to improved tabletability in a concentration-dependent manner, with higher amount of brittle excipient being more effective. For each mixture, tablet tensile strength goes through a minimum as the granulating water increases, for example, 1.4 MPa for the mixture containing 80% of lactose and 2.1 MPa for the mixture containing 80% Dical. These results, along with scanning electron microscope evidence, show that the addition of brittle excipients to an otherwise plastic powder is an effective formulation strategy to address the overgranulation problem in HSWG.© 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

16 keywords...

hide…