-
- Eva M Hoefnagels, Matthew D Waites, Stephen M Belkoff, and Bart A Swierstra.
- International Center for Orthopaedic Advancement, Department of Orthopaedic Surgery, Johns Hopkins University/Johns Hopkins Bayview Medical Center, Baltimore, MD, USA.
- Acta Orthop. 2007 Dec 1; 78 (6): 808-12.
Background And PurposeModern descriptions of the percutaneous triple hemisection technique for Achilles tendon lengthening do not take into account the axial twist in the ligament. We were concerned that technical failures of the lengthening technique might occur more often than has been reported, and analyzed the results of the triple hemisection technique in cadaveric tendons in quantitative and qualitative terms, focusing on insufficient or complete tenotomies.MethodsWe performed a percutaneous triple hemisection of the Achilles tendon in 20 legs from adult cadavers, and measured the increase in ankle dorsiflexion in degrees, the length of the cuts in mm, and the depth of the cuts as a percentage of the total diameter of the tendon. Failure of the hemisection was defined as a sliding gap of
Results21 of the 60 hemisections failed. These failures occurred in 12 of the 20 legs, and included 1 complete tendon rupture and 3 near-ruptures with only a few connecting fibers left.InterpretationOur findings support our hypothesis that technical failures in the triple hemisection procedure occur more often than acknowledged. Despite the scarce but good clinical results described in children, we suggest performing this technique as an open procedure, especially in cases where the boundaries of the tendon are less easily palpable (adults, obese children), and to use the largest possible distance between the hemisections. Notes
Knowledge, pearl, summary or comment to share?You can also include formatting, links, images and footnotes in your notes
- Simple formatting can be added to notes, such as
*italics*
,_underline_
or**bold**
. - Superscript can be denoted by
<sup>text</sup>
and subscript<sub>text</sub>
. - Numbered or bulleted lists can be created using either numbered lines
1. 2. 3.
, hyphens-
or asterisks*
. - Links can be included with:
[my link to pubmed](http://pubmed.com)
- Images can be included with:
![alt text](https://bestmedicaljournal.com/study_graph.jpg "Image Title Text")
- For footnotes use
[^1](This is a footnote.)
inline. - Or use an inline reference
[^1]
to refer to a longer footnote elseweher in the document[^1]: This is a long footnote.
.