• Nicholas A Alfonso, Weston Ryan, Todd Baldini, Michael Reiter, Christopher Joyce, and Cyril Mauffrey.
• Department of Orthopedic Surgery, University of Colorado School of Medicine, Aurora, CO.
• J Orthop Trauma. 2020 Feb 1; 34 (2): 89-94.

BackgroundPrecontoured quadrilateral surface buttress (PQSB) plates have grown in popularity for acetabular fracture fixation. However, our experience has pushed us to hypothesize that their use as sole means of fixation may cause fracture malreduction. A biomechanical model was created to investigate this theory.MethodsA transverse acetabular fracture was created and reduced anatomically in 18 synthetic hemipelvises. The reduced hemipelvises were fixated using 3 different techniques. Group A fixation included anterior and posterior column screws plus a suprapectineal pelvic reconstruction plate; group B models were fixed using a PQSB plate only; and group C models were fixed with an anterior column screw and a PQSB plate. Acetabular tracking points were placed before final fixation and used to quantify any postfixation displacement. One-way analysis of variance and Tukey HSD testing were used to determine the significant difference (P < 0.05).ResultsModels in group B had significant fracture displacement after final fixation when compared with group A and group C models. The average amount of displacement at the anterior column and within the acetabulum was 1.37 mm (95% CI, 1.08-1.65) in group B constructs compared with 0.32 mm (95% CI, 0.22-0.42) and 0.26 mm (95% CI, 0.15-0.38) in groups A and C constructs, respectively. There were no significant differences in displacement after final fixation between group A and group C models.ConclusionsPQSB plates for acetabular fractures cause malreduction when applied in isolation in this biomechanical model. If a PQSB plate is chosen for fixation, we suggest the use of a columnar lag screw at minimum to hold reduction before plate application.

15 keywords...

hide…