• Isabella Mehling, Rebekka Scheifl, Dorothea Mehler, Daniela Klitscher, Hans Hely, and Pol M Rommens.
• Center for Musculoskeletal Surgery, Department of Trauma Surgery, University Medical Center of the Johannes Gutenberg-University of Mainz, Germany. isabella.mehling@unimedizin-mainz.de
• Biomed Tech (Berl). 2013 Apr 1; 58 (2): 187-94.

AbstractNumerous angular stable plates for the distal radius exist, and technically based comparisons of the polyaxial locking interfaces are lacking. The aim of this mechanical study was to investigate three different locking interfaces of angular stable volar plates by cantilever bending: VA-LCP Two-Column Distal Radius Plates 2.4 mm (Synthes® GmbH, Oberdorf, Switzerland), IXOS® P4 (Martin, Tuttlingen, Germany) and VariAX™ (Stryker®, Duisburg, Germany). We assessed the strength of 0°, 5°, 10° and 15° screw locking angles and tested the bending strength from 10° to 5° angles by cyclic loading until breakage. The final setup repeated the above assessments by inclusion of four locking screws. The single screw-plate interfaces of the VA-LCP showed the highest bending moment at an angle of 0° and 5°, the IXOS® P4 at an angle of 10° and 15° and the VariAX™ when changing the insertion angle from 10° into 5°. The strength of polyaxial locking interfaces and mechanism of failure proved to be different among the examined plates.

12 keywords...

hide…