• Am J Sports Med · Aug 2009

    Arthroscopic suture material and knot type: an updated biomechanical analysis.

    • Kenneth G Swan, Todd Baldini, and Eric C McCarty.
    • Robert Wood Johnson University Hospital, New Brunswick, New Jersey, 08901, USA. kswanjr@yahoo.com
    • Am J Sports Med. 2009 Aug 1; 37 (8): 1578-85.

    BackgroundSeveral new arthroscopic suture materials are available. It is important for surgeons to know which suture-knot combination provides the strongest construct.HypothesisThe newer, polyblend sutures have dissimilar load-to-failure characteristics.Study DesignControlled laboratory study.MethodsThe load to failure of 4 knots was evaluated (surgeon's, Duncan loop, Samsung Medical Center [SMC], and Roeder) using 5 No. 2 suture materials (Ethibond, Ticron, FiberWire, ForceFiber, MaxBraid). One surgeon tied all knots. Fifteen samples were tested for each suture-knot configuration. Knots were pretensioned to 10 N, then loaded to failure at a rate of 1.0 mm/s. Failure load recorded was the maximum load applied between 0 and 3 mm of displacement. Cyclic loading of suture-knot samples was performed on 3 knots (surgeon's, Duncan loop, and SMC) using 4 suture materials (Ethibond, FiberWire, ForceFiber, MaxBraid). Six samples were tested for each suture-knot configuration. Knots were cyclically loaded from 5 to 40 N at 0.5 Hz for 1000 cycles, then loaded to failure. Data were compared with analysis of variance and the Tukey multiple range test and considered significant at P < .05.ResultsThe surgeon's and SMC knots were strongest, particularly if tied using MaxBraid or ForceFiber. With single load-to-failure testing, MaxBraid was significantly stronger than Ethibond, Ticron, or FiberWire, regardless of knot type used. ForceFiber was stronger than Ethibond and Ticron with any knot type, and stronger than FiberWire when tied with a surgeon's knot or Roeder knot. The MaxBraid surgeon's knot (246 N) and MaxBraid SMC knot (239 N) were more than twice as strong as the Ethibond surgeon's knot (111 N) and Ethibond SMC (118 N). With cyclic loading, MaxBraid and ForceFiber were stronger than FiberWire and Ethibond, regardless of knot type tied. The SMC knot using MaxBraid withstood the highest load, and was stronger than the Duncan loop tied with MaxBraid. When stricter criteria (1-mm and 2-mm displacement) for failure were used, MaxBraid and ForceFiber remained superior to other sutures, including FiberWire, but knot type became less significant.ConclusionNonabsorbable polyblend sutures are stronger than traditional sutures, but not all polyblend sutures are alike. MaxBraid and ForceFiber provide a stronger knot than FiberWire, Ethibond, and Ticron, particularly if tied using a surgeon's or SMC knot.Clinical RelevanceThe SMC knot using MaxBraid provides the strongest knot/suture combination of knots and sutures tested.

      Pubmed     Full text   Copy Citation     Plaintext  

      Add institutional full text...

    Notes

     
    Knowledge, pearl, summary or comment to share?
    300 characters remaining
    help        
    You can also include formatting, links, images and footnotes in your notes
    • Simple formatting can be added to notes, such as *italics*, _underline_ or **bold**.
    • Superscript can be denoted by <sup>text</sup> and subscript <sub>text</sub>.
    • Numbered or bulleted lists can be created using either numbered lines 1. 2. 3., hyphens - or asterisks *.
    • Links can be included with: [my link to pubmed](http://pubmed.com)
    • Images can be included with: ![alt text](https://bestmedicaljournal.com/study_graph.jpg "Image Title Text")
    • For footnotes use [^1](This is a footnote.) inline.
    • Or use an inline reference [^1] to refer to a longer footnote elseweher in the document [^1]: This is a long footnote..

    hide…