-
- Sebastian T Schindera, Elmar M Merkle, Brian M Dale, David M Delong, and Rendon C Nelson.
- Department of Radiology, Duke University Medical Center, Duke North-Room 1417, Erwin Road, Durham, NC 27710, USA.
- Acad Radiol. 2006 Oct 1; 13 (10): 1236-43.
Rationale And ObjectivesThe purpose of this study was to calculate the gain in signal-to-noise ratio (SNR) of four human abdominal tissues at 3.0 Tesla (T) compared with standard 1.5 T and to validate this calculation in vivo.Materials And MethodsThe expected gain in SNR at 3.0 T in the liver, pancreas, spleen, and kidney compared with standard 1.5 T was approximated theoretically for a T2-weighted HASTE (half-Fourier acquisition single-shot turbo spin-echo) and a T1-weighted gradient-echo in- and opposed-phase sequence. Fifteen healthy male subjects underwent abdominal MR imaging using a 1.5 T and 3.0 T scanner. Coronal T2-weighted HASTE images and axial T1-weighted gradient-echo in- and opposed-phase images were acquired using the sequence parameters optimized by the vendor.ResultsExcept for opposed-phased imaging of pancreatic tissue, in vivo adjusted SNR values of all abdominal tissues were significantly higher at 3.0 T for all sequences (P < .05). The highest overall gain in SNR was achieved with the HASTE sequence ranging from 3.8-fold for renal imaging to 7.4-fold for hepatic imaging. The theoretical calculation of SNR gain was in good agreement with the experimentally measured gain in SNR for the HASTE and the in-phase sequence.ConclusionHigh-field abdominal MR imaging at 3.0 T offers significantly higher SNR compared with standard 1.5 T MR imaging.
Notes
Knowledge, pearl, summary or comment to share?You can also include formatting, links, images and footnotes in your notes
- Simple formatting can be added to notes, such as
*italics*
,_underline_
or**bold**
. - Superscript can be denoted by
<sup>text</sup>
and subscript<sub>text</sub>
. - Numbered or bulleted lists can be created using either numbered lines
1. 2. 3.
, hyphens-
or asterisks*
. - Links can be included with:
[my link to pubmed](http://pubmed.com)
- Images can be included with:
![alt text](https://bestmedicaljournal.com/study_graph.jpg "Image Title Text")
- For footnotes use
[^1](This is a footnote.)
inline. - Or use an inline reference
[^1]
to refer to a longer footnote elseweher in the document[^1]: This is a long footnote.
.