-
- S Kubilay Pakin, Conrado Cavalcanti, Renata La Rocca, Mark E Schweitzer, and Ravinder R Regatte.
- Department of Radiology, The Center for Biomedical Imaging, New York University, 660 First Avenue, Ground Floor, New York, NY, USA. skpakin@yahoo.com
- Acad Radiol. 2006 Sep 1; 13 (9): 1135-42.
Rationale And ObjectivesTo measure signal-to-noise ratio (SNR), contrast, and relaxation times (T1 and T2) in human knee joint at 7.0T whole-body scanner.Materials And MethodsMRI experiments were performed on a 7.0T Siemens whole-body scanner using an 18-cm diameter transmit/receive knee coil. Normalized SNR and relaxation times (T1 and T2) were computed on all volunteers (healthy, n=5) for femoral, tibial, and patellar cartilage.ResultsAverage T1 values of femoral, tibial, and patellar cartilages were found as 1.55, 1.76, and 1.62 seconds, respectively. Average T2 values of femoral, tibial, and patellar cartilages were found as 51.3, 43.9, and 39.7 milliseconds, respectively. No statistically significant differences were observed between T1 and T2 values of different cartilage tissues (P>.08 for all comparisons). Compared with previously reported relaxation times of cartilage tissue at 3.0T, an approximately 35% increase was observed in T1 values, whereas no significant change was observed in T2. Regional analysis was also performed to investigate the change in relaxation parameters for weight-bearing vs. non-weight-bearing areas. A statistically significant difference was observed in T2 of tibial cartilage (P=.009). The rest of the comparisons yielded insignificant differences (P>.32).ConclusionOur preliminary results demonstrate the feasibility of acquiring high resolution three-dimensional images of knee joint (with and without fat suppression) at 7.0T whole-body scanner.
Notes
Knowledge, pearl, summary or comment to share?You can also include formatting, links, images and footnotes in your notes
- Simple formatting can be added to notes, such as
*italics*
,_underline_
or**bold**
. - Superscript can be denoted by
<sup>text</sup>
and subscript<sub>text</sub>
. - Numbered or bulleted lists can be created using either numbered lines
1. 2. 3.
, hyphens-
or asterisks*
. - Links can be included with:
[my link to pubmed](http://pubmed.com)
- Images can be included with:
![alt text](https://bestmedicaljournal.com/study_graph.jpg "Image Title Text")
- For footnotes use
[^1](This is a footnote.)
inline. - Or use an inline reference
[^1]
to refer to a longer footnote elseweher in the document[^1]: This is a long footnote.
.