• C B Saw, K V Krishna, C A Enke, and D H Hussey.
• Department of Radiation Oncology, University of Nebraska Medical Center, Omaha 68198-7521, USA. csaw@nhsnet.org
• Int. J. Radiat. Oncol. Biol. Phys. 2000 Jun 1; 47 (3): 821-4.

PurposeThe objective of this study was to reevaluate the dose nonuniformity of abutted fields defined using asymmetric collimators and one isocenter for treatment of the head and neck region.Methods And MaterialsBilateral parallel-opposed fields abutted to the anterior field at one isocenter were implemented in the treatment of head and neck. The effect of digital display tolerance can produce dose nonuniformity at the junction of the abutted fields. The amount of dose nonuniformity was quantified using both mathematical summation of dose profiles and by direct measurement of doses at the junction of the two abutted fields. The dose nonuniformity was obtained by irradiating the superior part of a film using bilateral parallel-opposed fields and the inferior part by an anterior field with a gap or an overlap. Dose profiles were taken at the depth of maximum dose for the anterior field across the abutted fields. The dose nonuniformity was determined for the case where the asymmetric jaw was set at -2 mm, -1 mm, 0, +1 mm, and +2 mm from the beam central axis.ResultsThe dose at the junction increases systematically as the abutment of the fields changes from a gap to an overlap. The dose nonuniformity with 1-mm gap and 1-mm overlap is about 15% underdose and overdose, respectively.ConclusionImperfect abutment of split fields due to digital display tolerance (+/-1 mm) of asymmetric collimator can cause an underdose or overdose of 15% of the delivered dose.

11 keywords...

hide…