-
J Magn Reson Imaging · May 2010
Three-dimensional balanced steady state free precession imaging of the prostate: flip angle dependency of the signal based on a two component T2-decay model.
- Tryggve H Storås, Kjell-Inge Gjesdal, Oystein B Gadmar, Jonn-Terje Geitung, and Nils-Einar Kløw.
- Section for Diagnostic Physics, Department of Radiology, Oslo University Hospital, Oslo, Norway. tstoras@fys.uio.no
- J Magn Reson Imaging. 2010 May 1; 31 (5): 1124-31.
PurposeTo investigate the contrast of three-dimensional balanced steady state free precession (3D bSSFP) in the two component T2 model and to apply the results to optimize 3D bSSFP for prostate imaging at 1.5 Tesla.Materials And MethodsIn each of seven healthy volunteers, six 3D bSSFP acquisitions were performed with flip angles (alpha) equally spaced between 10 degrees and 110 degrees . Predictions of signal and contrast were obtained from synthetic bSSFP images calculated from relaxation parameters obtained from a multi-spin-echo acquisition. One biexponential and two monoexponential models were applied. Measured and predicted signals were compared by simple linear regression.ResultsThe measured contrast to signal ratio increased continuously with alpha. Mean R(2) for the biexponential model was almost constant for alpha in the range 50-110 degrees . The biexponential model was a better predictor of the measured signal than the monoexponential model. A monoexponential model restricted to the echoes TE = 50-125 ms performed similar to the biexponential model. The predicted contrast peaked at alpha between 50 degrees and 90 degrees .ConclusionProstate imaging with bSSFP benefited from high flip angles. The biexponential model provided good signal prediction while predictions from the monoexponential models are dependent on the range of TE used for T2 determination.Copyright 2010 Wiley-Liss, Inc.
Notes
Knowledge, pearl, summary or comment to share?You can also include formatting, links, images and footnotes in your notes
- Simple formatting can be added to notes, such as
*italics*
,_underline_
or**bold**
. - Superscript can be denoted by
<sup>text</sup>
and subscript<sub>text</sub>
. - Numbered or bulleted lists can be created using either numbered lines
1. 2. 3.
, hyphens-
or asterisks*
. - Links can be included with:
[my link to pubmed](http://pubmed.com)
- Images can be included with:
![alt text](https://bestmedicaljournal.com/study_graph.jpg "Image Title Text")
- For footnotes use
[^1](This is a footnote.)
inline. - Or use an inline reference
[^1]
to refer to a longer footnote elseweher in the document[^1]: This is a long footnote.
.