-
IEEE Trans Med Imaging · Aug 1997
ReviewMultishot rosette trajectories for spectrally selective MR imaging.
- D C Noll.
- Department of Radiology, University of Pittsburgh Medical Center, PA 15213, USA. doug@mrctr.upmc.edu
- IEEE Trans Med Imaging. 1997 Aug 1; 16 (4): 372-7.
AbstractIn nuclear magnetic resonance, different spectral components often correspond to different chemical species and as such, spectral selectivity can be a valuable tool for diagnostic imaging. In the work presented here, a multishot image acquisition method based upon rosette K-space trajectories has been developed and implemented for spectrally selective magnetic resonance imaging (MRI). Parametric forms for the gradient waveforms and design constraints are derived, and an example multishot gradient design is presented. The spectral behavior for this imaging method is analyzed in a simulation model. For frequencies that are near to the resonant frequency, this method results in a lower intensity, but undistorted image, while for frequencies that are off-resonance by a large amount, the object is incoherently dephased into noise. A method by which acquisitions are delayed by small amounts is introduced to further reduce the residual intensity for off-resonant signals. An image reconstruction method based on convolution gridding, including a correction method for small amounts of magnetic field inhomogeneity, is implemented. Finally, the spectral selectivity is demonstrated in vivo in a study in which both water and lipid images are generated from a single imaging data set.
Notes
Knowledge, pearl, summary or comment to share?You can also include formatting, links, images and footnotes in your notes
- Simple formatting can be added to notes, such as
*italics*
,_underline_
or**bold**
. - Superscript can be denoted by
<sup>text</sup>
and subscript<sub>text</sub>
. - Numbered or bulleted lists can be created using either numbered lines
1. 2. 3.
, hyphens-
or asterisks*
. - Links can be included with:
[my link to pubmed](http://pubmed.com)
- Images can be included with:
![alt text](https://bestmedicaljournal.com/study_graph.jpg "Image Title Text")
- For footnotes use
[^1](This is a footnote.)
inline. - Or use an inline reference
[^1]
to refer to a longer footnote elseweher in the document[^1]: This is a long footnote.
.