• IEEE Trans Neural Syst Rehabil Eng · Dec 2005

    A time-series prediction approach for feature extraction in a brain-computer interface.

    • Damien Coyle, Girijesh Prasad, and Thomas Martin McGinnity.
    • Intelligent Systems Engineering Laboratory, School of Computing and Intelligent Systems, Faculty of Engineering, University of Ulster, Derry, Northern Ireland, UK. dh.coyle@ulster.ac.uk
    • IEEE Trans Neural Syst Rehabil Eng. 2005 Dec 1; 13 (4): 461-7.

    AbstractThis paper presents a feature extraction procedure (FEP) for a brain-computer interface (BCI) application where features are extracted from the electroencephalogram (EEG) recorded from subjects performing right and left motor imagery. Two neural networks (NNs) are trained to perform one-step-ahead predictions for the EEG time-series data, where one NN is trained on right motor imagery and the other on left motor imagery. Features are derived from the power (mean squared) of the prediction error or the power of the predicted signals. All features are calculated from a window through which all predicted signals pass. Separability of features is achieved due to the morphological differences of the EEG signals and each NNs specialization to the type of data on which it is trained. Linear discriminant analysis (LDA) is used for classification. This FEP is tested on three subjects off-line and classification accuracy (CA) rates range between 88% and 98%. The approach compares favorably to a well-known adaptive autoregressive (AAR) FEP and also a linear AAR model based prediction approach.

      Pubmed     Full text   Copy Citation     Plaintext  

      Add institutional full text...

    Notes

     
    Knowledge, pearl, summary or comment to share?
    300 characters remaining
    help        
    You can also include formatting, links, images and footnotes in your notes
    • Simple formatting can be added to notes, such as *italics*, _underline_ or **bold**.
    • Superscript can be denoted by <sup>text</sup> and subscript <sub>text</sub>.
    • Numbered or bulleted lists can be created using either numbered lines 1. 2. 3., hyphens - or asterisks *.
    • Links can be included with: [my link to pubmed](http://pubmed.com)
    • Images can be included with: ![alt text](https://bestmedicaljournal.com/study_graph.jpg "Image Title Text")
    • For footnotes use [^1](This is a footnote.) inline.
    • Or use an inline reference [^1] to refer to a longer footnote elseweher in the document [^1]: This is a long footnote..

    hide…