• IEEE Trans Med Imaging · Feb 2005

    SNR enhancement in radial SSFP imaging using partial k-space averaging.

    • Stefanie Winkelmann, Tobias Schaeffter, Holger Eggers, and Olaf Doessel.
    • Institute of Biomedical Engineering, University of Karlsruhe, 76128 Karlsruhe, Germany. Stefanie.Winkelmann@philips.com
    • IEEE Trans Med Imaging. 2005 Feb 1; 24 (2): 254-62.

    AbstractThe steady-state free precessing (SSFP) sequences, widely used in MRI today, acquire data only during a short fraction of the repetition time (TR). Thus, they exhibit a poor scan efficiency. In this paper, a novel approach to extending the acquisition window for a given TR without considerably modifying the basic sequence is explored for radial SSFP sequences. The additional data are primarily employed to increase the signal-to-noise ratio, rather than to improve the temporal resolution of the imaging. The approach is analyzed regarding its effect on the image SNR (signal to noise ratio) and the reconstruction algorithm. Results are presented for phantom experiments and cardiac functions studies. The gain in SNR is most notable in rapid imaging, since SNR enhancement for a constant repetition time may be used to compensate for the increase in noise resulting from angular undersampling.

      Pubmed     Full text   Copy Citation     Plaintext  

      Add institutional full text...

    Notes

     
    Knowledge, pearl, summary or comment to share?
    300 characters remaining
    help        
    You can also include formatting, links, images and footnotes in your notes
    • Simple formatting can be added to notes, such as *italics*, _underline_ or **bold**.
    • Superscript can be denoted by <sup>text</sup> and subscript <sub>text</sub>.
    • Numbered or bulleted lists can be created using either numbered lines 1. 2. 3., hyphens - or asterisks *.
    • Links can be included with: [my link to pubmed](http://pubmed.com)
    • Images can be included with: ![alt text](https://bestmedicaljournal.com/study_graph.jpg "Image Title Text")
    • For footnotes use [^1](This is a footnote.) inline.
    • Or use an inline reference [^1] to refer to a longer footnote elseweher in the document [^1]: This is a long footnote..

    hide…