• IEEE Trans Biomed Eng · Aug 2001

    Single-unit neural recording with active microelectrode arrays.

    • Q Bai and K D Wise.
    • Engineering Research Laboratory, Agilent Technologies, Inc, Palo Alto, CA 94304-1126, USA.
    • IEEE Trans Biomed Eng. 2001 Aug 1; 48 (8): 911-20.

    AbstractThis paper discusses the single-unit recording characteristics of microelectrode arrays containing on-chip signal processing circuitry. Probes buffered using on-chip unity-gain operational amplifiers provide an output resistance of 200 ohm with an input-referred noise of 11-muV root-mean-square (rms) (100 Hz-10 kHz). Simultaneous in vivo recordings from single neurons using buffered and unbuffered (passive) iridium recording sites separated by less than 20 microm have shown that the use of on-chip circuitry does not significantly degrade system noise. Single-unit neural activity has also been studied using probes containing closed-loop preamplifiers having a voltage gain of 40 dB and a bandwidth of 13 kHz, and several input dc-baseline stabilization techniques have been evaluated. Low-noise in vivo recordings with a multiplexed probe have been demonstrated for the first time using an external asymmetrical clock running at 200 kHz. The multiplexed system adds less than 8-muV rms of noise to the recorded signals, suppressing the 5-V clock transitions to less than 2 ppm.

      Pubmed     Full text   Copy Citation     Plaintext  

      Add institutional full text...

    Notes

     
    Knowledge, pearl, summary or comment to share?
    300 characters remaining
    help        
    You can also include formatting, links, images and footnotes in your notes
    • Simple formatting can be added to notes, such as *italics*, _underline_ or **bold**.
    • Superscript can be denoted by <sup>text</sup> and subscript <sub>text</sub>.
    • Numbered or bulleted lists can be created using either numbered lines 1. 2. 3., hyphens - or asterisks *.
    • Links can be included with: [my link to pubmed](http://pubmed.com)
    • Images can be included with: ![alt text](https://bestmedicaljournal.com/study_graph.jpg "Image Title Text")
    • For footnotes use [^1](This is a footnote.) inline.
    • Or use an inline reference [^1] to refer to a longer footnote elseweher in the document [^1]: This is a long footnote..

    hide…