-
J Occup Environ Hyg · Jan 2015
Protection of firefighters against combustion aerosol particles: simulated workplace protection factor of a half-mask respirator (pilot study).
- James Dietrich, Michael Yermakov, Tiina Reponen, Pramod Kulkarni, Chaolong Qi, and Sergey A Grinshpun.
- a Center for Health-Related Aerosol Studies, Department of Environmental Health , University of Cincinnati , Cincinnati , Ohio . E-mail: sergey.grinshpun@uc.edu.
- J Occup Environ Hyg. 2015 Jan 1; 12 (6): 415-20.
AbstractThe present pilot study investigated the penetration of ultrafine particles originated by combustion of different materials into elastomeric half-mask respirators equipped with two P100 filters. We determined the Simulated Workplace Protection Factor (SWPF) for 11 firefighters wearing elastomeric half-mask respirators and performing activities simulating those conducted during fire overhaul operations. The tests were performed in a controlled laboratory setting. A newly-developed battery-operated Portable Aerosol Mobility Spectrometer (PAMS) was used to measure size-resolved aerosol particle concentrations outside (C(out)) and inside (Cin) of an air-purifying respirator donned on a firefighter, and the SWPF was calculated as C(out)/C(in). Based on the total aerosol concentration, the "total" SWPF ranged from 4,222 (minimum) to 35,534 (maximum) with values falling primarily in a range from 11,171 (25 percentile) to 26,604 (75 percentile) and a median value being ≈15,000. This is consistent with the recently reported fit factor (FF) data base.((1)) The size-resolved SWPF data revealed a dependency on the particle size. It was concluded that a portable device such as PAMS can be used on firefighters during overhaul operations (as well as on other workers wearing elastomeric half-mask respirators) to monitor the aerosol concentrations in real time and ultimately help prevent overexposure.
Notes
Knowledge, pearl, summary or comment to share?You can also include formatting, links, images and footnotes in your notes
- Simple formatting can be added to notes, such as
*italics*
,_underline_
or**bold**
. - Superscript can be denoted by
<sup>text</sup>
and subscript<sub>text</sub>
. - Numbered or bulleted lists can be created using either numbered lines
1. 2. 3.
, hyphens-
or asterisks*
. - Links can be included with:
[my link to pubmed](http://pubmed.com)
- Images can be included with:
![alt text](https://bestmedicaljournal.com/study_graph.jpg "Image Title Text")
- For footnotes use
[^1](This is a footnote.)
inline. - Or use an inline reference
[^1]
to refer to a longer footnote elseweher in the document[^1]: This is a long footnote.
.