-
- Emeline Fresnel, Meryl Vedrenne-Cloquet, Marius Lebret, Lucie Griffon, Brigitte Fauroux, and Sonia Khirani.
- Kernel Biomedical, Rouen, France.
- Respir Care. 2023 Aug 1; 68 (8): 108710961087-1096.
BackgroundHome CPAP and noninvasive ventilation (NIV) are increasingly used in children. An appropriate choice of the CPAP/NIV device, according to the manufacturer recommendations, should guarantee accurate data collection software. However, not all devices display accurate patient data. We hypothesized that the detection of patient breathing may be expressed as a minimal tidal volume (VTmin ) rather than a minimal weight. The aim of the study was to estimate the VTmin detected by home ventilators when set on CPAP.MethodsTwelve level I-III devices were analyzed using a bench test. Pediatric profiles were simulated with increasing VT values to determine the VTmin that the ventilator may detect. The duration of CPAP use and the presence/absence of waveform tracings on the built-in software were also gathered.ResultsVTmin varied according to the device, ranging from 16-84 mL, independent of level category. The duration of CPAP use was underestimated in all level I devices, which were either not able to display any waveform or only intermittently, until VTmin was reached. The duration of CPAP use was overestimated for the level II and III devices, with the display of different waveforms according to the device as soon as the device was switched on.ConclusionsBased on the VTmin detected, some level I and II devices may be suitable for infants. A careful testing of the device should be done at CPAP initiation, with a review of data generated from ventilator software.Copyright © 2023 by Daedalus Enterprises.
Notes
Knowledge, pearl, summary or comment to share?You can also include formatting, links, images and footnotes in your notes
- Simple formatting can be added to notes, such as
*italics*
,_underline_
or**bold**
. - Superscript can be denoted by
<sup>text</sup>
and subscript<sub>text</sub>
. - Numbered or bulleted lists can be created using either numbered lines
1. 2. 3.
, hyphens-
or asterisks*
. - Links can be included with:
[my link to pubmed](http://pubmed.com)
- Images can be included with:
![alt text](https://bestmedicaljournal.com/study_graph.jpg "Image Title Text")
- For footnotes use
[^1](This is a footnote.)
inline. - Or use an inline reference
[^1]
to refer to a longer footnote elseweher in the document[^1]: This is a long footnote.
.