• Henrique Mansur, Lucas Sacramento Ramos, Phelipe Pinheiro Alves Lucas, Leonardo Rigobello Battaglion, and Anderson Freitas.
• Hospital Regional do Gama and Hospital Santa HelenaHospital Regional do Gama, Gama, Distrito Federal, Brazil. Electronic address: drhenriquemansur@gmail.com.
• Injury. 2023 Nov 1; 54 Suppl 6: 110782110782.

PurposeThe objectives of this study were to compare syndesmosis dislocation and ankle ligament stress after the fixation of the posterior malleolus fracture (PMF) with four different techniques by Finite Element Analysis (FEM).MethodsFour internal fixation techniques used for fixation of PMF were assessed by FEM: posterior one-third tubular 3.5 mm buttress plate (PP) with one screw (PP 1 screw), PP with two screws (PP 2 screws), two cannulated 3.5 mm lag screws in the anteroposterior (AP) direction (AP lag screws), and two posteroanterior (PA) cannulated 3.5 mm lag screws (PA lag screws). PMF with 30% fragment size was simulated through computational processing reconstructed from computed tomography (CT). The simulated loads of 700 N and 1200 N were applied to the proximal tibial end. The FEM evaluated the syndesmosis dislocation (mm) and stress values of the posterior tibiofibular ligament (PTFL) (in Kpa) and deltoid ligament (in Kpa) in the four mentioned subgroups.ResultsWe found that with a load of 700 N, syndesmosis dislocation varied from 6.5 to 7.9 mm, being the lowest and greatest for PA lag screw and PP 1 screw, respectively. In all groups was observed a greater dislocation in the syndesmosis at 1200 N of load. We observed that the stress values on the PTFL were lower for AP lag screws and PP 2 screws with 700 N and 1200 N, respectively. For both loads, PP 1 screw presented the greatest stress. Regarding the stress in the deltoid ligament, the AP lag screws presented the lowest stress for 700 N and PP 1 screw for 1200 N. For all fixation techniques, the syndesmosis displacement and ligament stresses were higher when 1200 N were imposed.ConclusionThis study demonstrated that PMF fixed with lag screws presents greater stability in the distal tibiofibular syndesmosis and higher joint loadings promoted greater displacement and ligaments stress, regardless of the fixation technique. Besides, lower stress in the syndesmosis is accompanied by a greater load on the deltoid ligament.Copyright © 2023 The Authors. Published by Elsevier Ltd.. All rights reserved.

25 keywords...

hide…