• Clin. Chim. Acta · Apr 2014

    Case Reports

    Falsely increased chloride and missed anion gap elevation during treatment with sodium thiosulfate.

    • Scott M Wendroth, Tiffany N Heady, Doris M Haverstick, Lorin M Bachmann, Mitchell G Scott, James C Boyd, and David E Bruns.
    • Department of Pathology, University of Virginia School of Medicine and Health System, Charlottesville, VA, United States. Electronic address: sw2de@virginia.edu.
    • Clin. Chim. Acta. 2014 Apr 20;431:77-9.

    BackgroundSodium thiosulfate (STS) is used to treat calciphylaxis and cyanide poisoning, but can lead to a serious anion-gap acidosis. We suspected that the calculated anion gap in a patient treated with STS for calciphylaxis was decreased to normal by a falsely increased chloride, and we hypothesized that STS directly interfered with chloride measurements.MethodsPlasma pools were prepared with 12 concentrations of STS from 0 to 20 mmol/l. Chloride was measured in each sample on 9 analyzers: Architect 16200, StatProfile pHOx Plus, RapidLab 1265®, Vitros 350®, Advia 1800, Roche Modular, iSTAT1, RAPIDpoint 500, and Radiometer ABL735.ResultsStatistically significant, dose-dependent increases in reported chloride concentrations were seen with all analyzers except the RAPIDpoint 500 and Vitros. The increases ranged from 5 to 75 mmol/l at the peak thiosulfate concentrations (33 mmol/l) expected in treated patients. The CLIA-allowable error of 5% was exceeded by 4 analyzers (Architect 16200, iSTAT1, StatProfile pHOx Plus, and Radiometer ABL735). The RAPIDpoint 500 showed a 3-mmol/l decrease in measured chloride over the tested range. The Vitros analyzer showed no interference.ConclusionsInterference of STS in chloride measurement in several common analyzers may lead to erroneous anion-gap calculations and confound the diagnosis of STS-induced anion-gap acidosis.Copyright © 2014 Elsevier B.V. All rights reserved.

      Pubmed     Full text   Copy Citation     Plaintext  

      Add institutional full text...

    Notes

     
    Knowledge, pearl, summary or comment to share?
    300 characters remaining
    help        
    You can also include formatting, links, images and footnotes in your notes
    • Simple formatting can be added to notes, such as *italics*, _underline_ or **bold**.
    • Superscript can be denoted by <sup>text</sup> and subscript <sub>text</sub>.
    • Numbered or bulleted lists can be created using either numbered lines 1. 2. 3., hyphens - or asterisks *.
    • Links can be included with: [my link to pubmed](http://pubmed.com)
    • Images can be included with: ![alt text](https://bestmedicaljournal.com/study_graph.jpg "Image Title Text")
    • For footnotes use [^1](This is a footnote.) inline.
    • Or use an inline reference [^1] to refer to a longer footnote elseweher in the document [^1]: This is a long footnote..

    hide…