- 
          
          
      
          
      
          - Christopher J Russian, Joshua F Gonzales, and Nicholas R Henry.
- Department of Respiratory Care, Texas State University, San Marcos, Texas.
- Respir Care. 2014 Jan 1;59(1):32-8.
 BackgroundCurrent American Association for Respiratory Care (AARC) clinical practice guidelines recommend a suction catheter to endotracheal tube ratio (SC/ETT) based on the external diameter of the SC and the internal diameter of the ETT. An SC/ETT ratio of < 50% is consistent with the current recommendation. We theorized that a more satisfactory assessment of SC/ETT ratio could be accomplished using volume or area formulas and expansion of diameter recommendations. Some respiratory care texts recommend an SC/ETT ratio that exceeds the clinical practice guideline standard.MethodsWe calculated the internal volume and cross-sectional area of various ETT sizes, the external volume and cross-sectional area of various SC sizes, and the SC/ETT ratios. We also measured negative pressures created by suction in a lung model, during multiple suction maneuvers.ResultsVolume and area calculations provide an alternative method for determining the SC/ETT ratio. A volume or area ratio of 50% corresponds to a diameter ratio of 70%. Negative pressures during suctioning remain low at the new ratios, so a larger SC than current clinical practice guidelines still allows adequate air passage between the SC and ETT.ConclusionsOur results support an alternative SC/ETT ratio when pairing SCs and ETTs. Notes
 Knowledge, pearl, summary or comment to share?You can also include formatting, links, images and footnotes in your notes- Simple formatting can be added to notes, such as *italics*,_underline_or**bold**.
- Superscript can be denoted by <sup>text</sup>and subscript<sub>text</sub>.
- Numbered or bulleted lists can be created using either numbered lines 1. 2. 3., hyphens-or asterisks*.
- Links can be included with: [my link to pubmed](http://pubmed.com)
- Images can be included with: 
- For footnotes use [^1](This is a footnote.)inline.
- Or use an inline reference [^1]to refer to a longer footnote elseweher in the document[^1]: This is a long footnote..