• A E Tomlinson, J Nysaether, J Kramer-Johansen, P A Steen, and E Dorph.
• Institute for Experimental Medical Research, Ulleval University Hospital, N-0407 Oslo, Norway.
• Resuscitation. 2007 Mar 1;72(3):364-70.

BackgroundRecent clinical studies reporting the high frequency of inadequate chest compression depth (<38 mm) during CPR, have prompted the question if adult human chest characteristics render it difficult to attain the recommended compression depth in certain patients.Material And MethodsUsing a specially designed monitor/defibrillator equipped with a sternal pad fitted with an accelerometer and a pressure sensor, compression force and depth was measured during CPR in 91 adult out-of-hospital cardiac arrest patients.ResultsThere was a strong non-linear relationship between the force of compression and depth achieved. Mean applied force for all patients was 30.3+/-8.2 kg and mean absolute compression depth 42+/-8 mm. For 87 of 91 patients 38 mm compression depth was obtained with less than 50 kg. Stiffer chests were compressed more forcefully than softer chests (p<0.001), but softer chests were compressed more deeply than stiffer chests (p=0.001). The force needed to reach 38 mm compression depth (F38) and mean compression force were higher for males than for females: 29.8+/-14.5 kg versus 22.5+/-10.2 kg (p<0.02), and 32.0+/-8.3 kg versus 27.0+/-7.0 kg (p<0.01), respectively. There was no significant variation in F38 or compression depth with age, but a significant 1.5 kg mean decrease in applied force for each 10 years increase in age (p<0.05). Chest stiffness decreased significantly (p<0.0001) with an increasing number of compressions performed. Average residual force during decompression was 1.7+/-1.0 kg, corresponding to an average residual depth of 3+/-2 mm.ConclusionIn most out-of-hospital cardiac arrest victims adequate chest compression depth can be achieved by a force<50 kg, indicating that an average sized and fit rescuer should be able to perform effective CPR in most adult patients.

28 keywords...

hide…