• Zhanqi Zhao, Daniel Steinmann, Inéz Frerichs, Josef Guttmann, and Knut Möller.
• Department of Biomedical Engineering, Furtwangen University, Jakob-Kienzle-Strasse 17, D-78054 Villingen-Schwenningen, Germany. zhanqi.zhao@hs-furtwangen.de
• Crit Care. 2010 Jan 1;14(1):R8.

IntroductionLung protective ventilation requires low tidal volume and suitable positive end-expiratory pressure (PEEP). To date, few methods have been accepted for clinical use to set the appropriate PEEP. The aim of this study was to test the feasibility of PEEP titration guided by ventilation homogeneity using the global inhomogeneity (GI) index based on electrical impedance tomography (EIT) images.MethodsIn a retrospective study, 10 anesthetized patients with healthy lungs mechanically ventilated under volume-controlled mode were investigated. Ventilation distribution was monitored by EIT. A standardized incremental PEEP trial (PEEP from 0 to 28 mbar, 2 mbar per step) was conducted. During the PEEP trial, "optimal" PEEP level for each patient was determined when the air was most homogeneously distributed in the lung, indicated by the lowest GI index value. Two published methods for setting PEEP were included for comparison based on the maximum global dynamic compliance and the intra-tidal compliance-volume curve.ResultsNo significant differences in the results were observed between the GI index method (12.2 +/- 4.6 mbar) and the dynamic compliance method (11.4 +/- 2.3 mbar, P > 0.6), or between the GI index and the compliance-volume curve method (12.2 +/- 4.9 mbar, P > 0.6).ConclusionsAccording to the results, it is feasible and reasonable to use the GI index to select the PEEP level with respect to ventilation homogeneity. The GI index may provide new insights into the relationship between lung mechanics and tidal volume distribution and may be used to guide ventilator settings.

12 keywords...

hide…