• Sung-Kon Ha, Se-Hoon Kim, Daniel H Kim, Jung-Yul Park, Dong-Jun Lim, and Sang-Kook Lee.
• Department of Neurosurgery, Korea University Medical Center, Seoul, Korea.
• J Korean Neurosurg S. 2009 Mar 1;45(3):169-75.

ObjectiveThe goal of this study was to evaluate the biomechanical features of human cadaveric spines implanted with the Activ L prosthesis.MethodsFive cadaveric human lumbosacral spines (L2-S2) were tested for different motion modes, i.e. extension and flexion, right and left lateral bending and rotation. Baseline measurements of the range of motion (ROM), disc pressure (DP), and facet strain (FS) were performed in six modes of motion by applying loads up to 8 Nm, with a loading rate of 0.3 Nm/second. A constant 400 N axial follower preload was applied throughout the loading. After the Activ L was implanted at the L4-L5 disc space, measurements were repeated in the same manner.ResultsThe Activ L arthroplasty showed statistically significant decrease of ROM during rotation, increase of ROM during flexion and lateral bending at the operative segment and increase of ROM at the inferior segment during flexion. The DP of the superior disc of the operative site was comparable to those of intact spine and the DP of the inferior disc decreased in all motion modes, but these were not statistically significant. For FS, statistically significant decrease was detected at the operative facet during flexion and at the inferior facet during rotation.ConclusionIn vitro physiologic preload setting, the Activ L arthroplasty showed less restoration of ROM at the operative and adjacent levels as compared with intact spine. However, results of this study revealed that there are several possible theoretical useful results to reduce the incidence of adjacent segment disease.

2 keywords...

hide…