-
- A D Baxter.
- Department of Anaesthesia, Ottawa University Faculty of Medicine, Ottawa General Hospital, Ontario.
- Can J Anaesth. 1997 Jun 1;44(6):643-52; quiz 652-3.
PurposeTo describe the pharmacokinetic behaviour and practical aspects of low (0.5-1 l.min-1) and minimal (0.25-0.5 l.min-1) flow anaesthesia.MethodsA Medline search located articles on low flow anaesthesia, and computer simulated anaesthetic uptake models are used.Principal FindingsMost, 85-90%, of anaesthetists use high fresh gas flow rates during inhalational anaesthesia. Low/minimal flow anaesthesia with a circle circuit may avoid the need for in-circuit humidifiers, raise the temperature of inspired gases by up to 6 degrees C, reduce cost by about 25% by reduction of fresh gas flows to 1.5 l.min-1, and reduce environmental pollution with scavenged gas. Knowledge of volatile anaesthetic pharmacokinetic behaviour facilitates the use of minimal/low flow rates. Small amounts of nitrogen or minute amounts of methane, acetone, carbon monoxide, and inert gases in the circuit are of no concern, but the degradation of desflurane (to carbon monoxide by dry absorbent) and sevoflurane (to compound A by using a fresh gas flow of > 2 l.min-1) must be avoided. With modern gas monitoring technology, safety should be no more of a concern than with high flow techniques.ConclusionThe use of fresh gas flow rates of < 1 l.min-1 for maintenance of anaesthesia has many advantages, and should be encouraged for inhalational anaesthesia with most modern volatile anaesthetics.
Notes
Knowledge, pearl, summary or comment to share?You can also include formatting, links, images and footnotes in your notes
- Simple formatting can be added to notes, such as
*italics*
,_underline_
or**bold**
. - Superscript can be denoted by
<sup>text</sup>
and subscript<sub>text</sub>
. - Numbered or bulleted lists can be created using either numbered lines
1. 2. 3.
, hyphens-
or asterisks*
. - Links can be included with:
[my link to pubmed](http://pubmed.com)
- Images can be included with:
![alt text](https://bestmedicaljournal.com/study_graph.jpg "Image Title Text")
- For footnotes use
[^1](This is a footnote.)
inline. - Or use an inline reference
[^1]
to refer to a longer footnote elseweher in the document[^1]: This is a long footnote.
.