• IEEE Trans Biomed Eng · Apr 2009

    A least mean-square filter for the estimation of the cardiopulmonary resuscitation artifact based on the frequency of the compressions.

    • Unai Irusta, Jesús Ruiz, Sofía Ruiz de Gauna, Trygve Eftestøl, and Jo Kramer-Johansen.
    • Department of Electronics and Telecommunications Engineering, University of Basque Country, Bilbao 48013, Spain. unai.irusta@ehu.es
    • IEEE Trans Biomed Eng. 2009 Apr 1;56(4):1052-62.

    AbstractCardiopulmonary resuscitation (CPR) artifacts caused by chest compressions and ventilations interfere with the rhythm diagnosis of automated external defibrillators (AED). CPR must be interrupted for a reliable diagnosis. However, pauses in chest compressions compromise the defibrillation success rate and reduce perfusion of vital organs. The removal of the CPR artifacts would enable compressions to continue during AED rhythm analysis, thereby increasing the likelihood of resuscitation success. We have estimated the CPR artifact using only the frequency of the compressions as additional information to model it. Our model of the artifact is adaptively estimated using a least mean-square (LMS) filter. It was tested on 89 shockable and 292 nonshockable ECG samples from real out-of-hospital sudden cardiac arrest episodes. We evaluated the results using the shock advice algorithm of a commercial AED. The sensitivity and specificity were above 95% and 85%, respectively, for a wide range of working conditions of the LMS filter. Our results show that the CPR artifact can be accurately modeled using only the frequency of the compressions. These can be easily registered after small changes in the hardware of the CPR compression pads.

      Pubmed     Full text   Copy Citation     Plaintext  

      Add institutional full text...

    Notes

     
    Knowledge, pearl, summary or comment to share?
    300 characters remaining
    help        
    You can also include formatting, links, images and footnotes in your notes
    • Simple formatting can be added to notes, such as *italics*, _underline_ or **bold**.
    • Superscript can be denoted by <sup>text</sup> and subscript <sub>text</sub>.
    • Numbered or bulleted lists can be created using either numbered lines 1. 2. 3., hyphens - or asterisks *.
    • Links can be included with: [my link to pubmed](http://pubmed.com)
    • Images can be included with: ![alt text](https://bestmedicaljournal.com/study_graph.jpg "Image Title Text")
    • For footnotes use [^1](This is a footnote.) inline.
    • Or use an inline reference [^1] to refer to a longer footnote elseweher in the document [^1]: This is a long footnote..

    hide…