-
- Erwin Argueta, Gilbert Berdine, Camilo Pena, and Kenneth M Nugent.
- Department of Internal Medicine, Texas Tech University Health Sciences Center, Lubbock, Texas.
- Am. J. Med. Sci. 2015 Apr 1;349(4):352-6.
AbstractThe FloTrac®/Vigileo device uses arterial pressure waveform analysis to calculate stroke volume and cardiac output; it does not require calibration against an independent measurement of cardiac output. Consequently, it provides a method to determine hemodynamic status, changes in the clinical course and responses to therapeutic interventions in patients who have arterial catheters in place. These devices perform relatively well in stable patients undergoing surgery and having an acceptable percentage error in differences between the FloTrac® device and invasive monitoring using pulmonary catheters. However, in patients with septic shock and other clinical states associated with low systemic vascular resistances, such as cirrhosis, the FloTrac® does not provided acceptable correlation with independent measurements with pulmonary artery catheters. FloTrac® measurements often underestimate the cardiac output and have unacceptably high percent error, which ranges from 30% to 60%. There is a moderate correlation with changes in cardiac output after fluid administration, but a poor correlation with changes in cardiac output after increases or decreases in norepinephrine administration. The bias between measurements increases as the systemic vascular resistance decreases. Consequently, cardiac output measurements using the FloTrac® device are not accurate enough for use in patients with septic shock, advanced liver disease and other medical conditions associated with decreased vascular tone.
Notes
Knowledge, pearl, summary or comment to share?You can also include formatting, links, images and footnotes in your notes
- Simple formatting can be added to notes, such as
*italics*
,_underline_
or**bold**
. - Superscript can be denoted by
<sup>text</sup>
and subscript<sub>text</sub>
. - Numbered or bulleted lists can be created using either numbered lines
1. 2. 3.
, hyphens-
or asterisks*
. - Links can be included with:
[my link to pubmed](http://pubmed.com)
- Images can be included with:
![alt text](https://bestmedicaljournal.com/study_graph.jpg "Image Title Text")
- For footnotes use
[^1](This is a footnote.)
inline. - Or use an inline reference
[^1]
to refer to a longer footnote elseweher in the document[^1]: This is a long footnote.
.