• Christine R Schuler, Michael S Kent, David C Deubner, Michael T Berakis, Michael McCawley, Paul K Henneberger, Milton D Rossman, and Kathleen Kreiss.
• Division of Respiratory Disease Studies, National Institute for Occupational Safety and Health, Centers for Disease Control and Prevention, Morgantown, West Virginia 26505, USA. cschuler@cdc.gov
• Am. J. Ind. Med. 2005 Mar 1;47(3):195-205.

BackgroundChronic beryllium disease (CBD), which primarily affects the lungs, occurs in sensitized beryllium-exposed individuals. At a copper-beryllium alloy strip and wire finishing facility we performed a cross-sectional survey to examine prevalences of beryllium sensitization and CBD, and relationships between sensitization and CBD and work areas/processes.MethodsCurrent employees (185) were offered beryllium lymphocyte proliferation testing (BeLPT) for sensitization, clinical evaluation for CBD (if sensitized), and questionnaires. We obtained historical airborne beryllium measurements.ResultsParticipation was 83%. Prevalences of sensitization and CBD were 7% (10/153) and 4% (6/153), respectively; this included employees with abnormal BeLPTs from two laboratories, four diagnosed with CBD during the survey, and one each diagnosed preceding and following the survey. Potential BeLPT laboratory problems were noted; one laboratory was twice as likely to have reported an abnormal result (P < 0.05, all tests), and five times as likely to have reported a borderline or uninterpretable result (P < 0.05, first blood draw and all tests). CBD risk was highest in rod and wire production (P < 0.05), where air levels were highest.ConclusionsSensitization and CBD were associated with an area in which beryllium air levels exceeded 0.2 microg/m3, and not with areas where this level was rarely exceeded. Employees at this copper-beryllium alloy facility had similar prevalences of sensitization and CBD as workers at facilities with higher beryllium air levels.

28 keywords...

hide…