-
- A Zontak, S Sideman, O Verbitsky, and R Beyar.
- The Heart System Research Center, The Julius Silver Institute of Biomedical Engineering, Department of Biomedical Engineering, Technion-Israel Institute of Technology, Haifa.
- Ann Biomed Eng. 1998 Nov 1;26(6):988-93.
AbstractExercise has a noted effect on skin blood flow and temperature. We aimed to characterize the normal skin temperature response to exercise by thermographic imaging. A study was conducted on ten healthy and active subjects (age=25.8+/-0.7 years) who were exposed to graded exercise for determination of maximal oxygen consumption (VO2 max), and subsequently to constant loads corresponding to 50%, 70%, and 90% of VO2 max. The skin temperature response during 20 min of constant load exercise is characterized by an initial descending limb, an ascending limb and a quasi-steady-state period. For 50% VO2 max, the temperature decrease rate was - 0.0075+/-0.001 degrees C/s during a time interval of 390+/-47 s and the temperature increase rate was 0.0055+/-0.0031 degrees C/s during a time interval of 484+/-99 s. The level of load did not influence the temperature decrease and increase rates. In contrast, during graded load exercise, a continuous temperature decrease of -0.0049+/-0.0032 degrees C/s was observed throughout the test. In summary, the thermographic skin response to exercise is characterized by a specific pattern which reflects the dynamic balance between hemodynamic and thermoregulatory processes.
Notes
Knowledge, pearl, summary or comment to share?You can also include formatting, links, images and footnotes in your notes
- Simple formatting can be added to notes, such as
*italics*
,_underline_
or**bold**
. - Superscript can be denoted by
<sup>text</sup>
and subscript<sub>text</sub>
. - Numbered or bulleted lists can be created using either numbered lines
1. 2. 3.
, hyphens-
or asterisks*
. - Links can be included with:
[my link to pubmed](http://pubmed.com)
- Images can be included with:
![alt text](https://bestmedicaljournal.com/study_graph.jpg "Image Title Text")
- For footnotes use
[^1](This is a footnote.)
inline. - Or use an inline reference
[^1]
to refer to a longer footnote elseweher in the document[^1]: This is a long footnote.
.