• Anesthesia and analgesia · Feb 2014

    The effectiveness of different functional fibrinogen polymerization assays in eliminating platelet contribution to clot strength in thromboelastometry.

    • Christoph J Schlimp, Cristina Solomon, Marco Ranucci, Gerald Hochleitner, Heinz Redl, and Herbert Schöchl.
    • From the *Ludwig Boltzmann Institute for Experimental and Clinical Traumatology and AUVA Research Centre, Vienna; †Department of Anesthesiology and Intensive Care, Salzburger Landeskliniken SALK, Salzburg, Austria; ‡CSL Behring, Marburg, Germany; §Department of Cardiothoracic and Vascular Anesthesia and Intensive Care, IRCCS Policlinico San Donato, Milan, Italy; and ‖Department of Anesthesiology and Intensive Care, AUVA Trauma Hospital of Salzburg, Salzburg, Austria.
    • Anesth. Analg.. 2014 Feb 1;118(2):269-76.

    BackgroundViscoelastic tests such as functional fibrinogen polymerization assays (FFPAs) in thrombelastography (TEG®) or thromboelastometry (ROTEM®) measure clot elasticity under platelet inhibition. Incomplete platelet inhibition influences maximum clot firmness (MCF) of FFPAs. We compared the ability of existing and newly developed FFPAs to eliminate the platelet contribution to clot strength.MethodsMCF of whole blood (WB), platelet-rich plasma (PRP), and platelet-poor plasma samples was recorded using a ROTEM device with different FFPAs, including the TEG functional fibrinogen test (FFTEG) and different ROTEM-based assays: the standard fib-tem reagent (FIBTEM), a lyophilized single-portion reagent fib-tem S (FIBTEM-S), a newly developed reagent FIBTEM PLUS, as well as FIBTEM or the standard extrinsic activation reagent ex-tem® (EXTEM) combined with 10-μg abciximab (FIBTEM-ABC/EXTEM-ABC).ResultsIn WB (platelet count [mean ± SD], 183 ± 37 × 10/μL; plasma fibrinogen concentration, 2.49 ± 0.58 g/L), FFTEG and EXTEM-ABC showed higher MCF (15.7 ± 2.8 mm) than FIBTEM or FIBTEM-S (11.4 ± 3.3 mm, P < 0.001), whereas FIBTEM-ABC and FIBTEM PLUS resulted in lower MCF (9.3 ± 2.8 mm, P < 0.001). In 2 different PRP samples, with platelet counts of 407 ± 80 × 10/μL and 609 ± 127 × 10/μL, FIBTEM-ABC and FIBTEM PLUS reduced platelet contribution to clot strength within 95% confidence interval limits of -1.4 to 0.1 mm and -1.2 to 0.4 mm, respectively. Using all FFPAs it was observed that the Pearson correlation coefficient between plasma fibrinogen concentration and WB MCF was high (range, 0.75-0.93) and significant, regardless of the underlying platelet inhibiting component. Evaluating differences in the interception of regression lines by using analysis of covariance, we compared platelet-poor plasma and both PRP samples within the same assays and found that in contrast to the FIBTEM-ABC and FIBTEM PLUS assays, the FFTEG, EXTEM-ABC, FIBTEM, and FIBTEM-S methods still detected residual platelet activity and grossly overestimated fibrin clot strength in samples with high platelet counts.ConclusionsFFPAs based solely on glycoprotein-IIb/IIIa inhibition, such as FFTEG or EXTEM-ABC, are less effective than cytochalasin D-based assays, such as FIBTEM or FIBTEM-S, at inhibiting the platelet component of clot strength. The FIBTEM PLUS assay, and the combination of FIBTEM and abciximab, sufficiently inhibits platelet contribution to clot elasticity. The combination of a glycoprotein-IIb/IIIa receptor blocker and cytochalasin D allows evaluation of functional fibrinogen polymerization without platelet "noise." In a clinical setting, the significance of potent platelet inhibition ensures a more accurate assessment of MCF and therefore the need for fibrinogen supplementation therapy. Further studies are necessary to investigate the application and impact of these tests in a clinical situation.

      Pubmed     Full text   Copy Citation     Plaintext  

      Add institutional full text...

    Notes

     
    Knowledge, pearl, summary or comment to share?
    300 characters remaining
    help        
    You can also include formatting, links, images and footnotes in your notes
    • Simple formatting can be added to notes, such as *italics*, _underline_ or **bold**.
    • Superscript can be denoted by <sup>text</sup> and subscript <sub>text</sub>.
    • Numbered or bulleted lists can be created using either numbered lines 1. 2. 3., hyphens - or asterisks *.
    • Links can be included with: [my link to pubmed](http://pubmed.com)
    • Images can be included with: ![alt text](https://bestmedicaljournal.com/study_graph.jpg "Image Title Text")
    • For footnotes use [^1](This is a footnote.) inline.
    • Or use an inline reference [^1] to refer to a longer footnote elseweher in the document [^1]: This is a long footnote..

    hide…