• Ann. Clin. Biochem. · Mar 1990

    Syringe injection pressure: a neglected factor in blood PO2 determination.

    • P Gosling and G Dickson.
    • Biochemistry Department, Selly Oak Hospital, Birmingham, UK.
    • Ann. Clin. Biochem. 1990 Mar 1;27 ( Pt 2):147-51.

    AbstractThe mean arterial blood PO2 values of 20 patients' samples taken into Sarstedt 2 mL Monovette syringes were found to be initially 0.43 kPa higher and after 15 min storage 0.93 kPa higher than the mean values using Corning 3 mL Blood Gas Kit syringes. The Sarstedt syringe allowed entry of small air bubbles and the plunger was noted to be stiff. We speculated that high injection pressures might increase measured PO2. Using each type of syringe, 20 ITU staff injected saline into a Corning 178 pH/blood analyser linked to a pressure transducer via a three-way connector. Mean injection pressures for Sarstedt and Corning syringes were 17.15 and 6.42 kPa, respectively (P less than 0.005). Following injection at pressures between 2.8 and 26.6 kPa, the mean PO2 of equilibrated saline containing an air bubble was 0.80 kPa higher than the mean value obtained at injection pressures of less than 2.8 kPa. However, with no air bubble the mean PO2 of equilibrated saline was still 0.45 kPa higher when injected at pressures between 2.8 and 26.6 kPa than the mean value obtained with injection pressures of 2.8 kPa. We suggest that for optimal PO2 determinations syringes should not only allow minimal air contamination but also have plungers that reduce injection pressure to a minimum.

      Pubmed     Copy Citation     Plaintext  

      Add institutional full text...

    Notes

     
    Knowledge, pearl, summary or comment to share?
    300 characters remaining
    help        
    You can also include formatting, links, images and footnotes in your notes
    • Simple formatting can be added to notes, such as *italics*, _underline_ or **bold**.
    • Superscript can be denoted by <sup>text</sup> and subscript <sub>text</sub>.
    • Numbered or bulleted lists can be created using either numbered lines 1. 2. 3., hyphens - or asterisks *.
    • Links can be included with: [my link to pubmed](http://pubmed.com)
    • Images can be included with: ![alt text](https://bestmedicaljournal.com/study_graph.jpg "Image Title Text")
    • For footnotes use [^1](This is a footnote.) inline.
    • Or use an inline reference [^1] to refer to a longer footnote elseweher in the document [^1]: This is a long footnote..

    hide…