• Br J Anaesth · Dec 1999

    Variables used to set PEEP in the lung lavage model are poorly related.

    • M Lichtwarck-Aschoff, A J Hedlund, K A Nordgren, G A Wegenius, A M Markström, J Guttmann, and U H Sjöstrand.
    • Department of Anaesthesiology and Intensive Care, Uppsala University Hospital, Sweden.
    • Br J Anaesth. 1999 Dec 1;83(6):890-7.

    AbstractSetting an appropriate positive end-expiratory pressure (PEEP) value is determined by respiratory mechanics, gas exchange and oxygen transport. As these variables may be optimal at different PEEP values, a unique PEEP value may not exist which satisfies both the demands of minimizing mechanical stress and optimizing oxygen transport. In 15 surfactant-deficient piglets, PEEP was increased progressively. Arterial oxygenation and functional residual capacity (FRC) increased, while specific compliance of the respiratory system decreased. Static compliance increased up to a threshold value of PEEP of 8 cm H2O, after which it decreased. This threshold PEEP did not coincide with the lower inflection point of the inspiratory limb of the pressure-volume (PV) loop. Oxygen transport did not correlate with respiratory mechanics or FRC. In the lavage model, the lower inflection point of the PV curve may reflect opening pressure rather than the pressure required to keep the recruited lung open. Recruitment takes place together with a change in the elastic properties of the already open parts of the lung. No single PEEP level is optimal for both oxygen transport and reduction of mechanical stress.

      Pubmed     Free full text   Copy Citation     Plaintext  

      Add institutional full text...

    Notes

     
    Knowledge, pearl, summary or comment to share?
    300 characters remaining
    help        
    You can also include formatting, links, images and footnotes in your notes
    • Simple formatting can be added to notes, such as *italics*, _underline_ or **bold**.
    • Superscript can be denoted by <sup>text</sup> and subscript <sub>text</sub>.
    • Numbered or bulleted lists can be created using either numbered lines 1. 2. 3., hyphens - or asterisks *.
    • Links can be included with: [my link to pubmed](http://pubmed.com)
    • Images can be included with: ![alt text](https://bestmedicaljournal.com/study_graph.jpg "Image Title Text")
    • For footnotes use [^1](This is a footnote.) inline.
    • Or use an inline reference [^1] to refer to a longer footnote elseweher in the document [^1]: This is a long footnote..

    hide…