• Critical care medicine · Feb 1983

    Measurement of ventilation during cardiopulmonary resuscitation.

    • J P Ornato, B L Bryson, P J Donovan, R R Farquharson, and C Jaeger.
    • Crit. Care Med. 1983 Feb 1;11(2):79-82.

    AbstractDetermining adequacy of mechanical ventilation is as important during CPR as in a more stable situation (such as, a patient on a ventilator in an ICU). Yet, such assessment during CPR usually only means listening for breath sounds, checking chest excursion, and blood gases. Exhaled tidal volume (VT) was measured on 45 intubated adult patients during resuscitation using a Wright's spirometer attached to a T-valve above the endotracheal tube. Ten patients had aspiration prior to intubation; 15 received advanced cardiac life support in the field, including esophageal airway insertion. CPR was performed in all cases with a mechanical compression device (Thumper). The pressure ventilator on this device was calibrated (peak inspiratory pressure, VT vs compliance) using a Dixie Test Lung, allowing indirect assessment of pulmonary compliance during CPR. Our findings suggest that lung compliance is markedly reduced within a short time after cardiac arrest. Fifty-five % of patients in this series could not be adequately oxygenated (PaO2 less than 50 torr) despite an FIO2 of 0.8 and adequate ventilation. Due to the reduced cardiac output during CPR causing venoarterial shunting, it is speculated that pulmonary edema is the most plausible explanation for this observation.

      Pubmed     Copy Citation     Plaintext  

      Add institutional full text...

    Notes

     
    Knowledge, pearl, summary or comment to share?
    300 characters remaining
    help        
    You can also include formatting, links, images and footnotes in your notes
    • Simple formatting can be added to notes, such as *italics*, _underline_ or **bold**.
    • Superscript can be denoted by <sup>text</sup> and subscript <sub>text</sub>.
    • Numbered or bulleted lists can be created using either numbered lines 1. 2. 3., hyphens - or asterisks *.
    • Links can be included with: [my link to pubmed](http://pubmed.com)
    • Images can be included with: ![alt text](https://bestmedicaljournal.com/study_graph.jpg "Image Title Text")
    • For footnotes use [^1](This is a footnote.) inline.
    • Or use an inline reference [^1] to refer to a longer footnote elseweher in the document [^1]: This is a long footnote..

    hide…