• Eur. Respir. J. · Jun 1991

    Active inspiratory impedance and neuromuscular respiratory output during halothane anaesthesia in humans.

    • J Canet, J Sanchis, D Navajas, R Farré, M M Rotger, and P Casan.
    • Servei d'Anestesiologia i Reanimació, Hospital General de Badalona Germans Trias i Pujol, Barcelona, Spain.
    • Eur. Respir. J. 1991 Jun 1; 4 (6): 703-10.

    AbstractThe aim of this study was to measure, in 11 patients with healthy lungs, active inspiratory impedance during anaesthesia. In addition, we recorded changes in inspiratory occlusion pressure at 100 ms (P0.1) and ventilatory pattern while awake and during anaesthesia with a mean inspiratory fraction (FI) of 0.017 halothane in O2. The total active inspiratory resistance and elastance values were 5.4 +/- 3.3 hPa.l.1.s and 29.9 +/- 6.2 hPa.l.1, respectively. P0.1 and the ratio between P0.1 and mean inspiratory flow (P0.1/(VT/TI)) increased 124% (p less than 0.001) and 68% (p less than 0.001), respectively, during anaesthesia. Respiratory frequency rose significantly from 12.2 +/- 1.5 (mean +/- SD) to 24.6 +/- 4.6 cycles.min-1, while tidal volume and inspiratory duty cycle lowered significantly from 0.599 +/- 0.195 l and 0.44 +/- 0.04 to 0.372 +/- 0.088 l (p less than 0.001) and 0.40 +/- 0.04 (p less than 0.05), respectively. Minute ventilation (VE) and VT/TI did not change significantly. During halothane anaesthesia with an FI:0.017, the increase in neuromuscular respiratory output appears to compensate for the increased mechanical load, thus resulting in maintenance of VE at levels similar to those of an awake state.

      Pubmed     Copy Citation     Plaintext  

      Add institutional full text...

    Notes

     
    Knowledge, pearl, summary or comment to share?
    300 characters remaining
    help        
    You can also include formatting, links, images and footnotes in your notes
    • Simple formatting can be added to notes, such as *italics*, _underline_ or **bold**.
    • Superscript can be denoted by <sup>text</sup> and subscript <sub>text</sub>.
    • Numbered or bulleted lists can be created using either numbered lines 1. 2. 3., hyphens - or asterisks *.
    • Links can be included with: [my link to pubmed](http://pubmed.com)
    • Images can be included with: ![alt text](https://bestmedicaljournal.com/study_graph.jpg "Image Title Text")
    • For footnotes use [^1](This is a footnote.) inline.
    • Or use an inline reference [^1] to refer to a longer footnote elseweher in the document [^1]: This is a long footnote..

    hide…