-
Acta Anaesthesiol Scand · Aug 1989
Carbon dioxide distribution in Mapleson A and D systems: an experimental study.
- P K Andersen, J E Olsen, A Jensen, and D B Stokke.
- Department of Anaesthesia, Odense University Hospital, Denmark.
- Acta Anaesthesiol Scand. 1989 Aug 1; 33 (6): 439-43.
AbstractThe distribution of CO2 in the Mapleson A and D rebreathing systems was investigated experimentally during controlled ventilation and with the expiratory valve closed during inspiration. Maximal and minimal levels of CO2-concentration obtained from capnograms along the tubing were used to construct "gas profiles". For both systems, high tidal volumes and low fresh gas flows resulted in a high degree of gas separation with a pool of alveolar gas near the expiratory valve, and longitudinal gas mixing was minimal. In this manner fresh gas loss was prevented and fresh gas utilization optimized. The end of the tubing nearest the patient was found to act as a reservoir for alveolar gas in the Mapleson A system and fresh gas in the Mapleson D system. Fresh gas utilization in the Mapleson D system was somewhat less efficient than in the Mapleson A system due to the fresh gas admixture to exhaled alveolar gas in the patient-near end of the tubing during expiration. The replacement of the usual expiratory valve of the Mapleson A system by a valve which is closed during inspiration makes the A system an alternative to the D system for controlled ventilation.
Notes
Knowledge, pearl, summary or comment to share?You can also include formatting, links, images and footnotes in your notes
- Simple formatting can be added to notes, such as
*italics*
,_underline_
or**bold**
. - Superscript can be denoted by
<sup>text</sup>
and subscript<sub>text</sub>
. - Numbered or bulleted lists can be created using either numbered lines
1. 2. 3.
, hyphens-
or asterisks*
. - Links can be included with:
[my link to pubmed](http://pubmed.com)
- Images can be included with:
![alt text](https://bestmedicaljournal.com/study_graph.jpg "Image Title Text")
- For footnotes use
[^1](This is a footnote.)
inline. - Or use an inline reference
[^1]
to refer to a longer footnote elseweher in the document[^1]: This is a long footnote.
.