-
Comparative Study
Dynamic in vivo response characteristics of three oximeters: Hewlett-Packard 47201A, Biox III, and Nellcor N-100.
- P West, C F George, and M H Kryger.
- Sleep. 1987 Jun 1; 10 (3): 263-71.
AbstractPulse oximeters (Biox III, Nellcor N-100) and a transmittance oximeter [Hewlett-Packard 47201A (HP)] were compared for SaO2 measurement and responsiveness during dynamic changes in arterial oxygen saturation and heart rate. Five sleep apnea syndrome patients were studied because they had large oscillations in SaO2 and heart rate in sleep. During sleep, each patient exhibited a series of rapid (18.0 +/- 8.3 s, mean +/- SD) oscillations in oxygen saturation (92.1 +/- 2.6% to 74.2 +/- 7.7%). Oxygen saturation measurements were sampled simultaneously from each oximeter by computer (at 2 Hz). Accuracy was assessed by comparing pulse and transmittance oxygen saturation measurements at the peak and trough of each apnea-related oscillation. Oximeter response was defined in terms of the "delay" or absolute time difference between the pulse oximeters and the transmittance oximeter for the determination of the peak and trough saturations. Linear regression analysis was used to establish accuracy and response relationships between pulse oximeter sensors (reusable ear, reusable digit, disposable digit, and disposable nasal sensors) and the transmittance oximeter sensor (reusable ear sensor). Pulse oximeter response delay was highly correlated with heart rate. Pulse oximeter SaO2 measurement and response characteristics varied considerably with sensor type (disposable, reusable) and sensor location (ear, nose, and digit). One must be aware of these differences in clinical and research application.
Notes
Knowledge, pearl, summary or comment to share?You can also include formatting, links, images and footnotes in your notes
- Simple formatting can be added to notes, such as
*italics*
,_underline_
or**bold**
. - Superscript can be denoted by
<sup>text</sup>
and subscript<sub>text</sub>
. - Numbered or bulleted lists can be created using either numbered lines
1. 2. 3.
, hyphens-
or asterisks*
. - Links can be included with:
[my link to pubmed](http://pubmed.com)
- Images can be included with:
![alt text](https://bestmedicaljournal.com/study_graph.jpg "Image Title Text")
- For footnotes use
[^1](This is a footnote.)
inline. - Or use an inline reference
[^1]
to refer to a longer footnote elseweher in the document[^1]: This is a long footnote.
.