• J. Appl. Physiol. · Jul 1999

    Comparative Study

    Estimation of inspiratory pressure drop in neonatal and pediatric endotracheal tubes.

    • P H Jarreau, B Louis, G Dassieu, L Desfrere, P W Blanchard, G Moriette, D Isabey, and A Harf.
    • Service de Médecine Néonatale, Centre Hospitalier Universitaire Cochin-Port Royal, Assistance Publique-Hôpitaux de Paris-Université Paris V, 75014 Paris, France. pierre-henri.jarreau@cch.ap-hop-paris.fr
    • J. Appl. Physiol. 1999 Jul 1; 87 (1): 36-46.

    AbstractEndotracheal tubes (ETTs) constitute a resistive extra load for intubated patients. The ETT pressure drop (DeltaP(ETT)) is usually described by empirical equations that are specific to one ETT only. Our laboratory previously showed that, in adult ETTs, DeltaP(ETT) is given by the Blasius formula (F. Lofaso, B. Louis, L. Brochard, A. Harf, and D. Isabey. Am. Rev. Respir. Dis. 146: 974-979, 1992). Here, we also propose a general formulation for neonatal and pediatric ETTs on the basis of adimensional analysis of the pressure-flow relationship. Pressure and flow were directly measured in seven ETTs (internal diameter: 2.5-7.0 mm). The measured pressure drop was compared with the predicted drop given by general laws for a curved tube. In neonatal ETTs (2.5-3.5 mm) the flow regime is laminar. The DeltaP(ETT) can be estimated by the Ito formula, which replaces Poiseuille's law for curved tubes. For pediatric ETTs (4.0-7.0 mm), DeltaP(ETT) depends on the following flow regime: for laminar flow, it must be calculated by the Ito formula, and for turbulent flow, by the Blasius formula. Both formulas allow for ETT geometry and gas properties.

      Pubmed     Free full text   Copy Citation     Plaintext  

      Add institutional full text...

    Notes

     
    Knowledge, pearl, summary or comment to share?
    300 characters remaining
    help        
    You can also include formatting, links, images and footnotes in your notes
    • Simple formatting can be added to notes, such as *italics*, _underline_ or **bold**.
    • Superscript can be denoted by <sup>text</sup> and subscript <sub>text</sub>.
    • Numbered or bulleted lists can be created using either numbered lines 1. 2. 3., hyphens - or asterisks *.
    • Links can be included with: [my link to pubmed](http://pubmed.com)
    • Images can be included with: ![alt text](https://bestmedicaljournal.com/study_graph.jpg "Image Title Text")
    • For footnotes use [^1](This is a footnote.) inline.
    • Or use an inline reference [^1] to refer to a longer footnote elseweher in the document [^1]: This is a long footnote..

    hide…