• J. Neurosci. Methods · Mar 2012

    A fully implanted programmable stimulator based on wireless communication for epidural spinal cord stimulation in rats.

    • Hui Zhou, Qi Xu, Jiping He, Hangkong Ren, Houlun Zhou, and Kejia Zheng.
    • Key Laboratory of Image Processing and Intelligent Control, Department of Control Science and Engineering, Huazhong University of Science and Technology, 1037 Luoyu Road, Wuhan 430074, China.
    • J. Neurosci. Methods. 2012 Mar 15; 204 (2): 341-8.

    AbstractClinical research indicates that the epidural spinal cord stimulation (ESCS) has shown potential in promoting locomotor recovery in patients with incomplete spinal cord injury (ISCI). This paper presents the development of a fully implantable voltage-regulated stimulator with bi-directional wireless communication for investigating underlying neural mechanisms of ESCS facilitating motor function improvement. The stimulation system consists of a computer, an external controller, an implantable pulse generator (IPG), a magnet, the extension leads and a stimulation electrode. The telemetry transmission between the IPG and the external controller is achieved by a commercially available transceiver chip with 2.4GHz carrier band. The magnet is used to activate the IPG only when necessary to minimize the power consumption. The encapsulated IPG measures 33mm×24mm×8mm, with a total mass of ∼12.6g. Feasibility experiments are conducted in three Sprague-Dawley rats to validate the function of the stimulator, and to investigate the relationship between lumbar-sacral ESCS and hindlimb electromyography (EMG) responses. The results show that the stimulation system provides an effective tool for investigation of ESCS application in motor function recovery in small animals.Copyright © 2011 Elsevier B.V. All rights reserved.

      Pubmed     Full text   Copy Citation     Plaintext  

      Add institutional full text...

    Notes

     
    Knowledge, pearl, summary or comment to share?
    300 characters remaining
    help        
    You can also include formatting, links, images and footnotes in your notes
    • Simple formatting can be added to notes, such as *italics*, _underline_ or **bold**.
    • Superscript can be denoted by <sup>text</sup> and subscript <sub>text</sub>.
    • Numbered or bulleted lists can be created using either numbered lines 1. 2. 3., hyphens - or asterisks *.
    • Links can be included with: [my link to pubmed](http://pubmed.com)
    • Images can be included with: ![alt text](https://bestmedicaljournal.com/study_graph.jpg "Image Title Text")
    • For footnotes use [^1](This is a footnote.) inline.
    • Or use an inline reference [^1] to refer to a longer footnote elseweher in the document [^1]: This is a long footnote..

    hide…