• Simon Thelen, Johannes Schneppendahl, Ralf Baumgärtner, Christian Eichler, Jürgen Koebke, Marcel Betsch, Mohssen Hakimi, Joachim Windolf, and Michael Wild.
• Department of Trauma and Hand Surgery, Heinrich Heine University Hospital Düsseldorf, Moorenstrasse 5, 40225, Düsseldorf, Germany.
• Knee Surg Sports Traumatol Arthrosc. 2013 Feb 1; 21 (2): 311-7.

PurposeA bilateral fixed-angle plate was biomechanically compared to the two currently preferred methods of osteosynthesis for transverse patella fractures. It was hypothesized that the new angle-stable implant would provide a secure and sustainable fracture fixation, superior to the established standard techniques.MethodsTwenty-one identical patellae made of polyurethane foam (Sawbones(®)), osteotomized to create a transverse two-part fracture, were fixed with modified anterior tension wiring, cannulated lag screws with anterior tension wiring or bilateral polyaxial 2.7-mm fixed-angle plates. The testing protocol consisted of 10,000 repetitive cycles using a non-destructive physiological load between 100 and 300 N at a simulated knee flexion of 60°.ResultsAll 21 Sawbone(®)-patellae sustained repetitive loading up to 10,000 cycles without failing. The anterior tension wire group displayed significant displacement of the fracture gap (0.7 ± 0.2 mm) during cyclic loading, while both lag screws with tension wiring and bilateral fixed-angle plates showed no fracture gap widening at all (p < 0.01).ConclusionThe bilateral fixed-angle plate and cannulated lag screws with anterior tension wiring preserved a constantly reduced fracture gap over 10,000 tensile cycles in contrast to modified anterior tension wiring, which exhibited significant widening of the gap after initial loading. Results of in vitro testing indicate that bilateral fixed-angle plates provide sustainable fixation stability offering a promising new option in the treatment for transverse patella fractures.

18 keywords...

hide…