-
Curr Opin Crit Care · Dec 2018
ReviewContinuous renal replacement therapy: understanding circuit hemodynamics to improve therapy adequacy.
- Thibault Michel, Hatem Ksouri, and Antoine G Schneider.
- Adult Intensive Care Unit and Burn Center, Centre Hospitalier Universitaire Vaudois, Lausanne.
- Curr Opin Crit Care. 2018 Dec 1; 24 (6): 455-462.
Purpose Of ReviewThe utilization of continuous renal replacement therapy (CRRT) increases throughout the world. Technological improvements have made its administration easier and safer. However, CRRT remains associated with numerous pitfalls and issues.Recent FindingsEven if new-generation CRRT devices have built-in safety features, understanding basic concepts remains of primary importance.SummaryCRRT circuits' maximum recommended lifespan (72 h) can often not be achieved. Such early artificial kidney failures are typically related to two processes: circuit clotting and membrane clogging. Although these processes are to some degree inevitable, they are facilitated by poor therapy management. Indeed, the majority of device-triggered alarms are associated with blood pump interruption, which through blood stasis, enhance clotting and clogging. If the underlying issue is not adequately managed, further alarms will rapidly lead to prolonged stasis and complete circuit clotting or clogging making its replacement mandatory. Hence, rapid recognition of issues triggering alarms is of paramount importance. Because most alarms are related to circuit's hemodynamics, a thorough understanding of these concepts is mandatory for the staff in charge of delivering the therapy.This review describes CRRT circuits, measured and calculated pressures and the way their knowledge might improve therapy adequacy.
Notes
Knowledge, pearl, summary or comment to share?You can also include formatting, links, images and footnotes in your notes
- Simple formatting can be added to notes, such as
*italics*
,_underline_
or**bold**
. - Superscript can be denoted by
<sup>text</sup>
and subscript<sub>text</sub>
. - Numbered or bulleted lists can be created using either numbered lines
1. 2. 3.
, hyphens-
or asterisks*
. - Links can be included with:
[my link to pubmed](http://pubmed.com)
- Images can be included with:
![alt text](https://bestmedicaljournal.com/study_graph.jpg "Image Title Text")
- For footnotes use
[^1](This is a footnote.)
inline. - Or use an inline reference
[^1]
to refer to a longer footnote elseweher in the document[^1]: This is a long footnote.
.