• World Neurosurg · Jan 2020

    Case Reports

    Use of 3D printing technology in complex spine surgeries.

    • Ran Lador, Gilad Regev, Khalil Salame, Morsi Khashan, and Zvi Lidar.
    • Spine Surgery Unit, Neurosurgical Department, Tel-Aviv Medical Center, Tel-Aviv, Israel; Department of Neurosurgery, University of Texas MD Anderson Cancer Center, Houston, Texas, USA. Electronic address: Ladormd@gmail.com.
    • World Neurosurg. 2020 Jan 1; 133: e327-e341.

    BackgroundMedical implications of 3-dimensional (3D) printing technology have evolved and are increasingly used. Surgical spine oncology involves at times complex resection using various surgical approaches and unique spinal reconstruction. As high general complication rates, including hardware failure, are reported, careful preoperative planning and optimized fixation techniques should be performed. 3D printing technology allows the improvement of preoperative planning, practice and exploration of various surgical approaches, and designing customized surgical tools and patient specific implants.ObjectiveTo investigate the use of 3D printing technology in complex spine surgeries.MethodsBetween 2015 and 2018, all complex spine oncological cases were evaluated and assessed for the possible benefit of use of 3D printing technology. Following high-quality imaging, a computerized integrated 3D model was created. Based on the planned procedure considering the various surgical steps, a customized 3D model was planned and printed, and in select cases a 3D custom-made implant was designed and printed in various sizes with matching trials.ResultsA total of 7 cases were selected for the use of a 3D printing technology. For all, a custom-made model was created. In 3 of these cases, a customized 3D-printed implant was used. Special customized intraoperative instruments were made for 2 cases, and a simulated surgical approach was performed in 5 cases. In 2 cases, pre-bent rods were made based on the model created and were used in surgery later on.ConclusionsFor complex spine oncology cases, the use of 3D printing allowed better preoperative planning, simplified the operative procedure, and enabled improved reconstruction.Copyright © 2019 Elsevier Inc. All rights reserved.

      Pubmed     Full text   Copy Citation     Plaintext  

      Add institutional full text...

    Notes

     
    Knowledge, pearl, summary or comment to share?
    300 characters remaining
    help        
    You can also include formatting, links, images and footnotes in your notes
    • Simple formatting can be added to notes, such as *italics*, _underline_ or **bold**.
    • Superscript can be denoted by <sup>text</sup> and subscript <sub>text</sub>.
    • Numbered or bulleted lists can be created using either numbered lines 1. 2. 3., hyphens - or asterisks *.
    • Links can be included with: [my link to pubmed](http://pubmed.com)
    • Images can be included with: ![alt text](https://bestmedicaljournal.com/study_graph.jpg "Image Title Text")
    • For footnotes use [^1](This is a footnote.) inline.
    • Or use an inline reference [^1] to refer to a longer footnote elseweher in the document [^1]: This is a long footnote..

    hide…