• Arch Orthop Trauma Surg · Jan 1990

    Biomechanics of the interlocking nail. A study of the proximal interlock.

    • C Kinast, R Frigg, and S M Perren.
    • Orthopädische Klinik und Poliklinik, Technischen Universität München, Federal Republic of Germany.
    • Arch Orthop Trauma Surg. 1990 Jan 1; 109 (4): 197-204.

    AbstractConventional interlocking nails for the femur use an inclined proximal interlocking screw; the AO/ASIF universal interlocking nail utilizes a transverse interlocking screw which is anchored in cortical bone. The transverse position of the screw allows one to employ the nail for either the right or left side. The yield strength of the thinner diameter transverse screw, (thread 4.5 mm. core 3.0 mm) was compared with that of the Grosse-Kempf nail oblique screw (thread 6.3 mm, core 4.5 mm) by testing in cadaver femora to evaluate the risk of fatigue failure. The test, performed using slow loading rates (50 N/s), simulated either a diaphyseal or a subtrochanteric fracture situation. The test rig applied a load corresponding to body weight and pull at the trochanter. Taking the highest load without plastic deformation as a criterion, the mechanical strength of the two screws was evaluated for each fracture situation. The thinner but shorter transverse interlocking screw demonstrated higher strength (4500 N vs. 3000 N; P less than or equal to 0.02) than the thicker inclined screw in the diaphyseal and the subtrochanteric fracture situation (2300 N vs. 1100 N; P less than or equal to 0.06). The biomechanical test showed the transverse screw to have sufficient and superior strength.

      Pubmed     Copy Citation  

      Add institutional full text...

    Notes

    hide…

What will the 'Medical Journal of You' look like?

Start your free 21 day trial now.

We guarantee your privacy. Your email address will not be shared.