• Conf Proc IEEE Eng Med Biol Soc · Jan 2010

    Artifact reduction based on Empirical Mode Decomposition (EMD) in photoplethysmography for pulse rate detection.

    • Qian Wang, Ping Yang, and Yuanting Zhang.
    • Key Laboratory of Biomedical information and Health Engineering, Shenzhen Institutes of Advanced Technology, Chinese Academy of Sciences, China. qian.wang@sub.siat.ac.cn
    • Conf Proc IEEE Eng Med Biol Soc. 2010 Jan 1; 2010: 959-62.

    AbstractThe pulstile components of photoplethysmography (PPG) contain valuable information about a subject's cardiovascular and metabolic systems. Pulse rate is one of the most significant vital signs that can be extracted from PPG signals. However, patient movement, especially movement at the measurement sites, such as fingers, can disturb the PPG's light path significantly, resulting in corrupted measurements. In this paper, a method is proposed for removing motion artifacts from PPG recordings. In this method, the Empirical Mode Decomposition (EMD) and Hilbert transform are used together to decompose PPG recordings into instantaneous frequency series on different scales of resolution. Motion artifacts and physiological signals are separated based on these series. The proposed method was used to recover PPG signals recorded in an experiment, where motion artifacts were intentionally introduced by finger bending. By using our method, the signal-to-noise ratio was increased from 0.078 dB of the contaminated signals to 0.318 dB, and the true detection rate of heartbeats was improved from 59.2% to 96.6%. The results demonstrated that the EMD combined with Hilbert transform has great potential in reducing motion artifacts in PPG signals and can improve the accuracy of heartbeat detection.

      Pubmed     Full text   Copy Citation     Plaintext  

      Add institutional full text...

    Notes

     
    Knowledge, pearl, summary or comment to share?
    300 characters remaining
    help        
    You can also include formatting, links, images and footnotes in your notes
    • Simple formatting can be added to notes, such as *italics*, _underline_ or **bold**.
    • Superscript can be denoted by <sup>text</sup> and subscript <sub>text</sub>.
    • Numbered or bulleted lists can be created using either numbered lines 1. 2. 3., hyphens - or asterisks *.
    • Links can be included with: [my link to pubmed](http://pubmed.com)
    • Images can be included with: ![alt text](https://bestmedicaljournal.com/study_graph.jpg "Image Title Text")
    • For footnotes use [^1](This is a footnote.) inline.
    • Or use an inline reference [^1] to refer to a longer footnote elseweher in the document [^1]: This is a long footnote..

    hide…