-
Journal of critical care · Jun 2020
Patients alter power of breathing as the primary response to changes in pressure support ventilation.
- Carl G Tams, Neil R Euliano, A Daniel Martin, Michael J Banner, Andrea Gabrielli, Steven Bonnet, Paul J Stephan, Adam J Seiver, and Michael A Gentile.
- Convergent Engineering, Gainesville, FL, United States.
- J Crit Care. 2020 Jun 1; 57: 208-213.
IntroductionThe patient-ventilator relationship is dynamic as the patient's health fluctuates and the ventilator settings are modified. Spontaneously breathing patients respond to mechanical ventilation by changing their patterns of breathing. This study measured the physiologic response when pressure support (PS) settings were modified during mechanical ventilation.MethodsSubjects were instrumented with a non-invasive pressure, flow, and carbon dioxide airway sensor to estimate tidal volume, respiratory rate, minute ventilation, and end-tidal CO2. Additionally, a catheter was used to measure esophageal pressure and estimate effort exerted during breathing. Respiratory function measurements were obtained while PS settings were adjusted 569 times between 5 and 25 cmH2O.ResultsData was collected on 248 patients. The primary patient response to changes in PS was to adjusting effort (power of breathing) followed by adjusting tidal volume. Changes in respiratory rate were less definite while changes in minute ventilation and end-tidal CO2 appeared unrelated to the change in PS.ConclusionThe data indicates that patients maintain a set minute ventilation by adjusting their breathing rate, volume, and power. The data indicates that the subjects regulate their Ve and PetCO2 by adjusting power of breathing and breathing pattern.Copyright © 2020 Elsevier Inc. All rights reserved.
Notes
Knowledge, pearl, summary or comment to share?You can also include formatting, links, images and footnotes in your notes
- Simple formatting can be added to notes, such as
*italics*
,_underline_
or**bold**
. - Superscript can be denoted by
<sup>text</sup>
and subscript<sub>text</sub>
. - Numbered or bulleted lists can be created using either numbered lines
1. 2. 3.
, hyphens-
or asterisks*
. - Links can be included with:
[my link to pubmed](http://pubmed.com)
- Images can be included with:
![alt text](https://bestmedicaljournal.com/study_graph.jpg "Image Title Text")
- For footnotes use
[^1](This is a footnote.)
inline. - Or use an inline reference
[^1]
to refer to a longer footnote elseweher in the document[^1]: This is a long footnote.
.