Journal of biomechanics
-
Journal of biomechanics · Jan 2007
Three-dimensional inhomogeneous triphasic finite-element analysis of physical signals and solute transport in human intervertebral disc under axial compression.
A 3D inhomogeneous finite-element model for charged hydrated soft tissues containing charged/uncharged solutes was developed and applied to analyze the mechanical, chemical, and electrical signals within the human intervertebral disc during an axial unconfined compression. The effects of tissue properties and boundary conditions on the physical signals and the transport of fluid and solute were investigated. The numerical simulation showed that, during disc compression, the fluid pressurization and the effective (von Misses) solid stress were more pronounced in the annulus fibrosus (AF) region near the interface between AF and nucleus pulposus (NP). ⋯ The electrical signals were very sensitive to fixed charge density. Changes in material properties of NP (water content, fixed charge density, and modulus) affected fluid pressure, electrical potential, effective stress, and solute transport in the disc. This study is important for understanding disc biomechanics, disc nutrition, and disc mechanobiology.
-
Journal of biomechanics · Jan 2007
Computational and experimental models of the human torso for non-penetrating ballistic impact.
Both computational finite element and experimental models of the human torso have been developed for ballistic impact testing. The human torso finite element model (HTFEM), including the thoracic skeletal structure and organs, was created in the finite element code LS-DYNA. The skeletal structure was assumed to be linear-elastic while all internal organs were modeled as viscoelastic. ⋯ A comparison of the HSTM and HTFEM response showed similar pressure profiles and less than 35% peak pressure difference for organs near the ballistic impact point. Furthermore, the peak sternum accelerations of the HSTM and HTFEM varied by less than 10% for impacts over the sternum. These models provide comparative tools for determining the thoracic response to ballistic impact and could be used to evaluate soft body armor design and efficacy, determine thoracic injury mechanisms and assist with injury prevention.
-
Finite element (FE) models are used to identify head injury mechanisms and design new and improved injury prevention schemes. Although brain-skull boundary conditions strongly influence the model mechanical responses, limited experimental data are available to develop an informed representation. We hypothesize that the spinal cord tension and gravity contribute to the pons displacement in vivo. ⋯ By comparing images before and after the motion, we found that while the rotation of the pons is negligible relative to the skull, the pons displaces significantly at the foramen magnum, on the order of approximately 2 mm. When the spinal cord tension and gravity act in concert, the pons moves caudally; when opposed, superiorly, such that the influence of gravity on the pons is six times that of the spinal cord tension. Based on these findings, we recommend that the brainstem-skull interface be treated as a sliding (with or without friction) boundary condition in FE models of the human head.
-
Journal of biomechanics · Jan 2007
3D finite element analyses of insertion of the Nucleus standard straight and the Contour electrode arrays into the human cochlea.
Previous experimental studies of insertion of the Nucleus standard straight and the Contour arrays into the scala tympani have reported that the electrode arrays cause damage to various cochlear structures. However, the level of insertion-induced damage by these electrode arrays to cochlear structures (the spiral ligament, the basilar membrane and the osseous spiral lamina) has not been quantified. Although it has been suggested that rotation can overcome this resistance and prevent the basilar membrane from being pierced by the tip of the Nucleus standard straight array, there has not been any attempt to study the relationship between the rotation and the reduction of damage to the basilar membrane. ⋯ The perforation of the basilar membrane by the tip of the Nucleus standard straight array at the region of 11-14 mm from the round window appears to be compounded by the geometry of the spiral passage of the scala tympani. Anti-clockwise rotations between 25 degrees and 90 degrees applied at the basal end of the electrode array (for the right cochlea) were shown to significantly reduce the contact stresses exerted by the tip on the basilar membrane which support the practice of applying small rotation partway through insertion of electrode array to minimize damage to the basilar membrane. Although the Contour array (with its stylet intact) is stiffer than the Nucleus standard straight array, a slight withdrawal of the stylet from the Contour array before insertion was found to significantly reduce damage by the electrode array to the spiral ligament and the basilar membrane.
-
Journal of biomechanics · Jan 2007
Cervical facet capsular ligament yield defines the threshold for injury and persistent joint-mediated neck pain.
The cervical facet joint has been identified as a source of neck pain, and its capsular ligament is a likely candidate for injury during whiplash. Many studies have shown that the mechanical properties of ligaments can be altered by subfailure injury. However, the subfailure mechanical response of the facet capsular ligament has not been well defined, particularly in the context of physiology and pain. ⋯ Ligament yield point occurred at a distraction magnitude in which pain symptoms begin to appear in vivo in the rat. These mechanical findings provide insight into the relationship between gross structural failure and painful loading for the facet capsular ligament, which has not been previously defined for such neck injuries. Findings also present a framework for more in-depth methods to define the threshold for persistent pain and could enable extrapolation to the human response.