Clinical biomechanics
-
Clinical biomechanics · Mar 2012
Comparative StudyBiomechanical analysis of pedicle screw thread differential design in an osteoporotic cadaver model.
Pedicle screw fixation, the standard surgical care for posterior stabilization in the thoraco-lumbar spine has a high rate of failure in osteoporotic individuals. Screw design factors and insertion techniques have been shown to influence the biomechanical performance of pedicle screws. Our objective was to investigate the biomechanical characteristics of pedicle screw fixation in osteoporotic bone by comparing standard screws with newly designed differential crest thickness dual lead screws. ⋯ Compared with standard pedicle screws, the dual lead osteoporotic-specific pedicle screws demonstrated significantly larger insertion torques and similar pullout properties. Non-significant increased biomechanical strength was observed for thin crest compared to thick crest dual lead pedicle screws indicating their enhanced purchase in osteoporotic bone.
-
Clinical biomechanics · Jan 2012
Comparative StudyDo facet screws provide the required stability in lumbar fixation? A biomechanical comparison of the Boucher technique and pedicular fixation in primary and circumferential fusions.
Transfacet pedicle screws are scarcely used in primary posterior fixation, and have limited use unilaterally or with existing anterior instrumentation. Nevertheless, the incomplete literature suggests equivalent or better performance of ipsilateral, bilateral, facet screws compared to bilateral pedicle screws. ⋯ Transfacet pedicle screws provided similar fixation to bilateral pedicle screws in primary and circumferential fixations during flexion-extension. In the other modes, transfacet screw rigidity is, on average, less than bilateral pedicle screws when used alone, but with the addition of other anterior instrumentation the differences are minimized. Therefore, facet screws are warranted based on the surgical effect desired, and in the presence of additional anterior fixation.
-
Clinical biomechanics · Jan 2012
Biomechanical evaluation of bone-cement augmented Proximal Femoral Nail Antirotation blades in a polyurethane foam model with low density.
Helically shaped cephalic implants have proven their benefit to provide an improved stabilization of unstable hip fractures. However, cut out ratios up to 3.6% still occur. This in vitro study evaluated the biomechanical performance of a novel cement augmentation technique of the Proximal Femoral Nail Antirotation in surrogate femora. ⋯ Cement augmentation of the Proximal Femoral Nail Antirotation blade with small amounts of bone-cement for treatment of osteoporotic hip fractures clearly enhances fixation stability and carries high potential for clinical application.
-
Clinical biomechanics · Jan 2012
Study of patellar kinematics after reconstruction of the medial patellofemoral ligament.
Medial patellofemoral ligament reconstruction is currently the technique of choice for the treatment of patellar instability. But what should be the most appropriate graft tension for optimal restoration of patellofemoral kinematics? ⋯ This study confirms the role of the medial patellofemoral ligament in providing adequate patellar stability during the first 30° of knee flexion. According to our findings, a 10 N tension applied to the graft appears sufficient to ensure proper control of patellar tracking whereas 20, 30 and 40 N of tension are excessive tension values inducing a major overcorrection in all studied parameters.
-
Clinical biomechanics · Dec 2011
Randomized Controlled TrialThe influence of energy storage and return foot stiffness on walking mechanics and muscle activity in below-knee amputees.
Below-knee amputees commonly experience asymmetrical gait patterns and develop comorbidities in their intact and residual legs. Carbon fiber prosthetic feet have been developed to minimize these asymmetries by utilizing elastic energy storage and return to provide body support, forward propulsion and leg swing initiation. However, how prosthetic foot stiffness influences walking characteristics is not well-understood. The purpose of this study was to identify the influence of foot stiffness on kinematics, kinetics, muscle activity, prosthetic energy storage and return, and mechanical efficiency during amputee walking. ⋯ Decreasing foot stiffness can increase prosthesis range of motion, mid-stance energy storage and late-stance energy return, but the net contributions to forward propulsion and swing initiation may be limited as additional muscle activity to provide body support becomes necessary.