Foot & ankle international
-
Comparative Study
The effects of adult acquired flatfoot deformity on tibiotalar joint contact characteristics.
Changes in the tibiotalar contact characteristics were investigated using eight fresh frozen cadaver ankle specimens to further develop an established model of the acquired flatfoot deformity. The deformity was simulated by sectioning the tendons and ligaments of the ankle and foot that normally support the longitudinal arch. Axial loads of 1,350 N were applied to the foot in a neutral position in both the intact specimen and flatfoot model. ⋯ This suggests a transfer of load off of the talar dome. Increased loading of the lateral facet and fibula are suspected. The lateral shift in the contact region created a local increase in mean contact pressure that may be responsible for long term degenerative changes in patients with this deformity.
-
Compartment syndrome of the newly discovered calcaneal compartment of the foot is a theoretical possibility following tibial fracture due to the communication with the deep posterior compartment of the calf. Forty-nine patients were reviewed at least 18 months after open or closed tibial shaft fractures treated with tibial nailing in order to determine the prevalence of foot deformities secondary to previously undetected calcaneal or leg compartment syndromes. ⋯ None of the patients complained of any symptoms from their feet and none had any significant foot deformities. Calcaneal compartment syndrome is rare after tibial fracture and routine measurement of calcaneal compartment pressures after such injuries is not indicated.
-
Six patients with chronic widening and instability of the tibiofibular syndesmosis subsequent to pronation--external rotation ankle fractures were reviewed as regards diagnosis and treatment. An evaluation of the syndesmotic interval was best done by CT scans using axial cuts. Delayed reduction and stabilization using primarily large screw fixation resulted in maintenance of the reduction and satisfactory results in 5 of 6 cases. In one case, an arthrodesis of the tibiofibular interval was done because of significant incongruity.
-
Fifty-eight patients with 60 talar fractures were retrospectively reviewed. There were 39 men and 19 women. The age average was 32 (range, 14-74). ⋯ The outcome was different with every rating system. However, the outcome with AOFAS Ankle-Hindfoot Score and Hawkins Evaluation Criteria were almost equivalent. Assessment with the three rating scores showed that the process fractures had the best results followed by the neck and then the body fractures.
-
Comparative Study
Biomechanical comparison of syndesmosis fixation with 3.5- and 4.5-millimeter stainless steel screws.
Although most authors recommend either 3.5-mm or 4.5-mm cortical screws for syndesmosis fixation, the optimum screw size has yet to be defined. The present study was designed to biomechanically compare syndesmosis fixation with 3.5-mm and 4.5-mm stainless steel screws. Simulated pronation external rotation ankle injuries were created in twelve paired, fresh-frozen cadaveric leg specimens. ⋯ Failure torque was slightly higher in group I; however, the difference was not statistically significant (17.8 +/- 2.0 N-m vs. 14.3 +/- 2.6 N-m in group II; p=0.082). Five specimens in group I failed by screw pullout and five specimens in group II failed by fibula fracture (p=0.061). The present results suggest that there is no biomechanical advantage of a 4.5-mm screw over a 3.5-mm in fixation of the syndesmosis.