IEEE transactions on ultrasonics, ferroelectrics, and frequency control
-
IEEE Trans Ultrason Ferroelectr Freq Control · Jul 2012
A single FPGA-based portable ultrasound imaging system for point-of-care applications.
We present a cost-effective portable ultrasound system based on a single field-programmable gate array (FPGA) for point-of-care applications. In the portable ultrasound system developed, all the ultrasound signal and image processing modules, including an effective 32-channel receive beamformer with pseudo-dynamic focusing, are embedded in an FPGA chip. ⋯ The potable ultrasound system developed can provide real-time B-mode imaging with a maximum frame rate of 30, and it has a battery life of approximately 1.5 h. These results indicate that the single FPGA-based portable ultrasound system developed is able to meet the processing requirements in medical ultrasound imaging while providing improved flexibility for adapting to emerging POC applications.
-
IEEE Trans Ultrason Ferroelectr Freq Control · Jul 2012
FPGA-based reconfigurable processor for ultrafast interlaced ultrasound and photoacoustic imaging.
In this paper, we report, to the best of our knowledge, a unique field-programmable gate array (FPGA)-based reconfigurable processor for real-time interlaced co-registered ultrasound and photoacoustic imaging and its application in imaging tumor dynamic response. The FPGA is used to control, acquire, store, delay-and-sum, and transfer the data for real-time co-registered imaging. The FPGA controls the ultrasound transmission and ultrasound and photoacoustic data acquisition process of a customized 16-channel module that contains all of the necessary analog and digital circuits. ⋯ It performs another role by parallel accessing of internal memories and multi-thread processing to reduce the transfer of data and the processing load on the DSP. Furthermore, because the laser will be pulsing even during ultrasound pulse-echo acquisition, the FPGA ensures that the laser pulses are far enough from the pulse-echo acquisitions by appropriate time-division multiplexing (TDM). A co-registered ultrasound and photoacoustic imaging system consisting of four FPGA modules (64-channels) is constructed, and its performance is demonstrated using phantom targets and in vivo mouse tumor models.
-
IEEE Trans Ultrason Ferroelectr Freq Control · Jul 2012
An FPGA-based ultrasound imaging system using capacitive micromachined ultrasonic transducers.
We report the design and experimental results of a field-programmable gate array (FPGA)-based real-time ultrasound imaging system that uses a 16-element phased-array capacitive micromachined ultrasonic transducer fabricated using a fusion bonding process. The imaging system consists of the transducer, discrete analog components situated on a custom-made circuit board, the FPGA, and a monitor. ⋯ An experiment is carried out to obtain the sector B-scan of a 4-wire target. The ultrasound imaging system demonstrates the possibility of an integrated system-in-a-package solution.
-
IEEE Trans Ultrason Ferroelectr Freq Control · Jul 2012
An ultrasonic imaging system based on a new SAFT approach and a GPU beamformer.
The design of newer ultrasonic imaging systems attempts to obtain low-cost, small-sized devices with reduced power consumption that are capable of reaching high frame rates with high image quality. In this regard, synthetic aperture techniques have been very useful. They reduce hardware requirements and accelerate information capture. ⋯ They provide excellent computing power with which a very large volume of data can easily and quickly be processed. This paper describes a new system architecture that merges both principles. Thus, using a minimum-redundancy synthetic aperture technique to acquire the signals (2R-SAFT), and a graphics processing unit as a beamformer, we have developed a new scanner with full dynamic focusing, both on emission and reception, that attains real-time imaging with very few resources.
-
IEEE Trans Ultrason Ferroelectr Freq Control · Jul 2012
A reconfigurable and programmable FPGA-based system for nonstandard ultrasound methods.
The availability of programmable and reconfigurable ultrasound (US) research platforms may have a considerable impact on the advancement of ultrasound systems technology; indeed, they allow novel transmission strategies or challenging processing methods to be tested and experimentally refined. In this paper, the ULtrasound Advanced Open Platform (ULA-OP), recently developed in our University laboratory, is shown to be a flexible tool that can be easily adapted to a wide range of applications. Five nonstandard working modalities are illustrated. ⋯ Flow-mediated dilation, pulse compression, and high-frame-rate imaging highlight the flexibility of data access at different points in the reception chain. For each modality, the role played by the onboard programmable devices is discussed. Experimental results are reported, indicating the relative performance of the system for each application.