• Ann Fr Anesth Reanim · Dec 2011

    [Reliability of the pulse contour analysis for cardiac output measurement for assessing the fluid responsiveness].

    • V Reubrecht, G Dingemans, A Gache, J-L Faillie, G Gardès, and C Bengler.
    • Service des réanimations, division anesthésie réanimation douleur urgence, CHU de Nîmes, place du Pr. Robert-Debré, 30029 Nîmes cedex 9, France.
    • Ann Fr Anesth Reanim. 2011 Dec 1;30(12):877-82.

    BackgroundThe cardiac output (CO) is classically measured in intensive care unit patients. pulse contour (PC) method allows monitoring of CO.ObjectiveThe aim of the present study was to assess the ability of PC to assess the fluid responsiveness defined as an increase in CO more than or equal to 15% after 500 mL hydroxyethyl starch over 20 minutes.Patients And MethodsIn this observational prospective study, patients in shock in whom a PC method was inserted were included. CO was measure using the PC and thermodilution methods before and after a fluid challenge indicated by the physician. The correlation coefficient was measured, the diagram of Bland and Altman was built and the percentage of error (Critchley and Critchley method) was calculated. The ability of PC to diagnose fluid responsiveness was assessed using a receiver operating characteristics (ROC) curve.ResultsSixty-two fluid challenges were performed in 37 included patients. After fluid challenge, r(2) was 0.05 (P<0.01), the bias between PC and thermodilution was 0.3 ± 1.2L/min and the percentage of error was 36%. The area of the ROC curve was 0.601 [0.468-0.723].ConclusionIn ICU patients with shock, PC cannot replace thermodilution to diagnose fluid responsiveness.Copyright © 2011. Published by Elsevier SAS.

      Pubmed     Full text   Copy Citation     Plaintext  

      Add institutional full text...

    Notes

     
    Knowledge, pearl, summary or comment to share?
    300 characters remaining
    help        
    You can also include formatting, links, images and footnotes in your notes
    • Simple formatting can be added to notes, such as *italics*, _underline_ or **bold**.
    • Superscript can be denoted by <sup>text</sup> and subscript <sub>text</sub>.
    • Numbered or bulleted lists can be created using either numbered lines 1. 2. 3., hyphens - or asterisks *.
    • Links can be included with: [my link to pubmed](http://pubmed.com)
    • Images can be included with: ![alt text](https://bestmedicaljournal.com/study_graph.jpg "Image Title Text")
    • For footnotes use [^1](This is a footnote.) inline.
    • Or use an inline reference [^1] to refer to a longer footnote elseweher in the document [^1]: This is a long footnote..

    hide…